Arched Top Gate Designs for Garden Entrances

Why choose an arched top for your entrance

A flat gate can look rigid next to plants, stone walls and rounded garden paths. An arched top softens the line of the entrance and makes the whole front of the property feel more inviting. It also reads well from the street, where the curve adds character without the need for heavy decoration.

Arched designs suit homes with garden features such as pergolas, round planters or stone cladding. They balance well with both modern and traditional facades, so the gate can match the house rather than compete with it.

Arched gate styles we build

Arched tops can be combined with different infill patterns and frame profiles. The most common options include:

• Full arch with vertical bars for a classic garden look
• Shallow arch with horizontal lines for a contemporary entrance
• Arch with decorative scrolls or a central motif
• Solid panel with an arched cap for more privacy

Each style can be produced as a sliding gate or a swing gate, depending on the space available in front of the entrance.

Sliding or swing: which suits an arched gate

Electric sliding gates are often the better choice when the driveway is narrow or when you need the full opening clear for parking. The arched top runs along the track, so the gate needs a solid, level guide and a well-supported frame. Swing gates suit wider entrances and can be fitted with an electric operator on each leaf.

For either type, the curve adds weight and wind load at the top of the gate. We check the balance and hinge or roller positions during the drawing stage so the gate moves smoothly for years.

Materials and finishes

Arched gates are usually built from steel or aluminum profiles, depending on the size, weight and exposure. Steel offers strength for larger gates, while aluminum is lighter and easier on motors. Both can be finished for the coastal climate of Tel Aviv.

• Hot-dip galvanizing for corrosion protection
• Powder coating in a colour matched to your house
• Stainless steel fittings for hinges and fixings

Your choice of finish affects both the look and the maintenance over time, so we discuss it at the inquiry stage.

How the design process works

It starts with photos of your entrance and a message describing what you have in mind. We then visit the site to measure the opening, the wall height and the ground levels. This is important because an arch must sit correctly within the opening and clear the driveway surface.

After measuring, we prepare a drawing and a written specification. You review it, ask for changes if needed, and approve it before production begins in our factory on Rival Street. Installation follows once the finished gate is ready.

Safety and standards

An electric gate with an arched top must meet safety requirements for movement, pinch points and access. Railings and infill used alongside the gate may need to follow the Israeli standard SI 1142, which covers guarding and barriers. Exact dimensional requirements are checked with your engineer or local authority, so we confirm them during the design stage rather than guessing on site.

Good design keeps children and pets safe while still giving the entrance the open, curved look you want.

Frequently asked questions

Can an arched top be added to an electric sliding gate?

Yes, an arched top can be built into an electric sliding gate. The frame and track must be engineered to carry the curved weight and keep the gate running smoothly.

Do arched gates cost more than flat-top gates?

Arched gates involve more fabrication work than flat designs, so the final quote depends on size, style and finish. We provide an itemised quote after the site visit and drawing stage.

How long does it take to make an arched gate?

Timing depends on the design, the finish and the current workload. We confirm the schedule when you approve the drawing and specification.

Can the arch match my existing fence or railings?

Yes, we can match the profile, infill pattern and colour of your existing fence or railings. Bring photos or measurements to the inquiry so we can plan the match accurately.

Common mistakes to avoid

Choosing an arch without checking the opening and ground levels is a common error, as the curve may clash with the wall or driveway. Skipping the finish choice can also lead to early corrosion in a coastal environment.

Our recommendation

Send us photos of your entrance and a rough sketch of the curve you like before measuring, so we can suggest a height and arch shape that suits both the gate and the wall. For electric models, ask us to plan the motor and track position at the same stage.

Summary

An arched top gives a garden entrance a softer, more welcoming look and works with both sliding and swing electric gates. Each design is measured, drawn and made to fit your property.

Related guides

• Flat Top vs Curved Top Gates: Which Suits Your Home
• Gate Designs for Pergola-Style Entrances
• Swing Gate Leaf Designs for Double-Wing Entrances
• Brick Wall Gate Integration: Design Principles
• Sliding Gate Panel Layouts for Narrow Frontages
• Gate Design for Stone Walls: Balancing Texture and Metal
• All models in this category