Automatic Gate for a Caravan Park or Campsite Entrance

t286-7

An automatic gate at a campsite entrance controls who comes and goes, keeps the site secure after dark, and makes arrivals smoother for guests and staff. Electric sliding gates suit wide entrances with limited space, while swing gates work well where there is room to open inward or outward. The right choice depends on the entrance width, ground slope, traffic volume and how guests will gain access.

Why campsites and caravan parks install automatic gates

An entrance gate is often the first thing guests notice and the first line of security for your site. An automatic gate lets staff manage vehicle movement without leaving the reception desk, and it keeps the site closed to passers-by during the night. For parks with seasonal guests or mixed bookings, it also helps separate registered visitors from general traffic.

Automation also reduces queues at busy arrival times. Guests can enter with a remote, a code or a card, which saves time at the barrier and keeps the approach road clear.

Sliding or swing: choosing the right type

The two main options each suit different sites.

Electric sliding gate: runs along a track and needs only the width of the gate on one side. Good for narrow sites, slopes and entrances where the gate cannot swing into the road.
Electric swing gate: opens on hinges and is often less costly to build where there is free space behind or in front of the posts.

Measure the space carefully before deciding, since obstacles such as trees, kerbs or parked cars can block the swing.

Access control and guest convenience

Access can be handled in several ways: remote controls for residents and staff, keypads or card readers for registered guests, and intercom systems for visitors arriving without a code. Each method has a different level of security and a different cost of administration, so it is worth deciding early who needs access and how often codes will change.

Clear signage and a well-lit approach help guests find the entry point, especially at night when arrivals are often late.

Safety features you should not skip

Any powered gate must protect people and vehicles. Look for safety edges or photocells that stop and reverse the gate when something is in the path. The gate should also have a safe way to be opened manually during a power cut, so guests or emergency services are never trapped.

Check that the gate's movement does not create a crush point against a post, wall or parked vehicle. For railings and fences along the approach, the Israeli railing standard SI 1142 is a useful general reference, but exact values should always be confirmed with your engineer.

From first inquiry to installation

The process usually follows a clear sequence. Start by sending photos of the entrance and a short note on how the site is used. We then measure on site and prepare a drawing and a written specification for your approval.

Inquiry with photos and access requirements
On-site measurement and assessment of the ground
Drawing and specification for your approval
Production in our Tel Aviv workshop
Finishing with hot-dip galvanizing and powder coating
Installation and handover

Maintenance and long-term reliability

An automatic gate works hard, especially at a busy site, so a simple maintenance routine pays off. Keep the track or hinges clear of sand, leaves and debris, check that the safety devices respond correctly, and test the manual release at regular intervals. Coated steel finishes stand up better to coastal and outdoor conditions, which matters for most campsites.

Agree on a schedule with your installer so that small faults are caught before they stop the gate during peak arrival times.

Frequently asked questions

Is a sliding or swing gate better for a campsite?

A sliding gate is usually better where space is tight or the ground slopes, since it does not swing into the road. A swing gate can be simpler and suitable when there is clear space on one side of the entrance.

Can guests open the gate without staff being present?

Yes, guests can use a remote, keypad code, card reader or intercom depending on how you set up access. The best choice depends on how many guests you have and how often access details change.

What happens to the gate during a power cut?

A well-designed automatic gate includes a manual release so it can be opened by hand. Make sure everyone who needs to know how to use it is shown the procedure.

How do I start the process?

Send us photos of your entrance and a short description of how the site is used. We will arrange an on-site measurement and then prepare a drawing and specification for your approval.

Common mistakes to avoid

Choosing a gate type without measuring the swing or track space, and skipping safety edges or a manual release, are the most common errors. Both can cause damage, delays and safety risks once the site is busy.

Our recommendation

Plan the access method and the traffic flow before choosing the gate, and allow room for vehicles to wait off the road. Ask for a written specification that lists the safety devices and the manual release so you can compare options clearly.

Summary

An automatic gate gives a campsite or caravan park better security, smoother arrivals and simpler access control when it is matched to the entrance and guest needs.

השאירו פרטים ונחזור אליכם