Book a Glass Partition Site Measurement | Techno Kol Uzi

t425-47

A glass partition site measurement is an on-site visit where our team checks the exact opening, floor and ceiling conditions, wall materials and light flow before any glass is ordered. It gives you a written drawing and specification, so the partition is made to fit your space and your chosen finish.

Why an On-Site Measurement Matters for Glass Partitions

Glass partitions look simple, but a few millimeters of error in height or width can cause gaps, stress on the glass or a door that does not close properly. Floors are rarely perfectly level, walls are seldom perfectly straight, and ceilings often vary from one end of a room to the other.

A site measurement captures these real conditions. Measuring by photo or from a plan alone usually misses details that only show up once the space is accessed in person.

What Happens During the Visit

Our team arrives at the agreed time and reviews the area with you. We take the measurements needed for the design and note how the partition will attach to the floor, ceiling and side walls.

Opening width and height at several points
Floor levelness and the height of any skirting or tiles
Wall material and fixing points
Door swing, handle position and daylight direction

Please keep the area clear so the measurements are easy to take.

Choosing Glass Type and Finish

During the visit we also talk through the options. Clear, tinted and frosted glass each change the feel of a room and how much light and privacy it allows. Frame finishes such as stainless steel or powder-coated metal should match the other metalwork in your space.

Bring samples or photos of your interior if you have them. Seeing the finish next to your floors and walls helps you decide faster.

What You Receive After the Measurement

After the visit you receive a drawing and a written specification. These describe the dimensions, glass type, frame finish, door arrangement and installation details. Nothing is produced until you approve the document.

Review the drawing carefully and ask questions about anything that is unclear. Changes are easier to make at this stage than after production begins.

Preparing Your Space Before We Arrive

A little preparation makes the visit smoother. Clear the work area, make sure the access route is open, and note any issues you have noticed, such as a door that sticks or a wall that feels uneven.

Remove loose furniture near the opening
Tell us about any existing glass or frames to be replaced
Have any building or access rules ready for the team

From Approved Drawing to Installation

Once the drawing is approved, the partition is produced in our factory and finished according to the agreed specification. Installation is scheduled after production so the glass and frame can be fitted to the measurements taken on site.

Because the visit comes first, the installation day usually goes more smoothly, with fewer adjustments needed on the spot.

Frequently asked questions

How long does a site measurement take?

The visit length depends on the size and number of openings. Our team will confirm the expected time when you book.

Do I need to be present during the measurement?

It is helpful if you or someone who can make decisions is present, so questions about glass type, finish and door position can be answered on the spot.

Can you measure from photos instead of visiting?

Photos are useful for the initial inquiry, but a precise specification requires an on-site measurement to capture the real conditions of the space.

What if I change my mind after receiving the drawing?

You can request changes to the drawing before approval. Once production starts, changes may be limited, so review the document carefully first.

Common mistakes to avoid

Many customers skip the measurement and order from a rough estimate, which often leads to gaps or misfitting doors. Choosing glass type and finish without seeing samples next to your interior can also lead to disappointment.

Our recommendation

Measure at several points across the height and width, and include the floor condition in your notes. Bring your intended finish samples to the visit so the glass and frame can be chosen with real light and surroundings in mind.

Summary

A glass partition site measurement captures the real conditions of your space so the partition fits correctly, and it gives you a clear drawing and specification before production.

השאירו פרטים ונחזור אליכם