Can I Request a Site Visit Before Ordering a Glass Partition?

t422-45

Yes. You can request a site visit before ordering a glass partition, and it is a common step so that measurements are taken on the actual space rather than from plans. The visit lets the factory confirm dimensions, floor and ceiling conditions, and how the partition will fit before any production starts.

Why a site visit matters for glass partitions

A glass partition is made to measure, so small differences in a wall, floor or ceiling can change the final result. Drawings and floor plans are useful, but they rarely show the real condition of a room. Walls may not be perfectly straight, floors may slope, and ceilings may be lower in one corner than another.

Measuring on site reduces the risk that a finished panel will not fit. It also gives you a chance to talk through the layout while the space is in front of you.

What happens during the visit

The visit is usually carried out by someone from the factory who checks the opening or area where the partition will go. The measurements are recorded and compared with the drawings you provided.

Width and height at several points
Floor levelness and any slope
Wall and ceiling conditions
Location of doors, sockets and fixed elements

Photos are often taken to support the written notes.

How to prepare before the visit

Preparation helps the visit go smoothly. Clear the area where possible so the measurer can reach each wall and corner. Have any existing drawings, photos and notes ready, and mark the intended position of the partition if you have decided it.

It also helps to think about how you use the room, such as whether you need a door, which side should open, and whether you want clear glass or a particular finish.

From measurement to written specification

After the visit, the information is turned into a drawing and a written specification. This document describes the sizes, glass type, frame finish, door arrangement and installation notes. It is shared with you for review.

Production only begins after you approve the specification. This gives you a clear point to check that everything matches what you expect.

Who usually benefits most from a visit

Site visits are especially useful for homeowners renovating an older apartment, building committees, contractors and interior designers working on tight or irregular spaces. They are also valuable when a partition needs to meet an existing structure exactly.

If the space is straightforward and well documented, the visit may be quicker, but it still offers a useful check before ordering.

Next steps after you request a visit

To start, send a short inquiry with photos of the area and any rough dimensions you have. The factory can then arrange a suitable time for the measurement. Once the visit is complete and you approve the written specification, the order moves to production.

Keeping photos and notes from the start makes the whole process faster for everyone involved.

Frequently asked questions

Do I have to pay for a site visit before ordering?

Please ask the factory directly about the visit arrangements, as the terms are confirmed when you make your inquiry. The team can explain what applies to your project.

Can I attend the measurement myself?

Yes, you are welcome to be present so you can point out details and ask questions during the visit. Being there can make it easier to agree on the layout.

What if my walls are not straight?

Uneven walls are common, and the measurement is designed to capture them. The specification will reflect the real conditions of the space.

How long after the visit does production start?

Production starts after you approve the written specification. The factory will confirm timing with you once the approval is in place.

Common mistakes to avoid

A common mistake is ordering from a floor plan alone without checking the real space. Skipping the visit can lead to panels that do not fit walls, floors or ceilings as expected.

Our recommendation

Request the site visit before you commit, and have photos and any existing drawings ready to share. Review the written specification carefully before approving it, since it is the final reference for production.

Summary

You can request a site visit before ordering a glass partition, and it is a practical way to confirm measurements on the actual space before production begins.

השאירו פרטים ונחזור אליכם