Curved Balcony Railings for Irregular Balconies

t314-22

A curved balcony railing is a balcony guard made to follow the actual line of your balcony, whether it is round, angled or irregular. Standard straight panels rarely fit these shapes, so the railing is measured on site and fabricated to size in the factory. This custom approach keeps the look clean and the fit secure.

Why Standard Railings Often Fail on Curved Balconies

Most ready-made railing panels assume a straight edge. When a balcony curves, bends at a corner or narrows toward one end, a straight panel leaves gaps, forces awkward cuts or sits at the wrong height along its length.

The result is often an uneven look and weak points where the railing meets the slab. Owners of uniquely shaped balconies usually find that a made-to-measure solution is the only way to get a clean, finished edge that looks intentional.

How a Curved Railing Is Measured On Site

Measurement is the step that decides everything else. Our team visits the balcony and records the exact curve, the length of each arc, the corner angles and the height from the slab to the top rail.

Overall outline of the slab edge, taken at several points
Height and any level differences along the edge
Positions of fixing points, columns and drainage outlets

Photos and sketches from you help us plan the job before we arrive.

Drawing and Specification Before Production

After measuring, we prepare a drawing and a written specification showing the railing layout, bar spacing, top rail profile and fixing method. You review it and approve it before anything goes into production, so there are no surprises.

This step is especially important for curves, where small changes in radius or bar placement affect both the appearance and the way the panels join. Clear approval at this stage keeps the project on track.

Shaping and Fabricating the Railing in the Factory

Our workshop at Rival Street 37 in Tel Aviv bends and cuts the steel, aluminum or stainless steel sections to the approved curve. Each panel is built and checked against the drawing so that it matches the balcony when installed.

Working in the factory allows careful control of the curve and the joints, which is difficult to achieve with improvised cutting on site. Panels are prepared in sections that can be handled and fixed without damaging the finish.

Finishing and Protection for Balcony Conditions

Balconies are exposed to rain, sun and salty air, so finishing matters. Depending on the material and design, railings can be hot-dip galvanized and powder coated for long-lasting protection against corrosion.

We discuss the colour and finish with you during the approval stage, so the railing suits the building and the rest of your home.

Installation and Final Fit Check

Installation follows the approved plan. Our installers fix the railing to the slab or edge beam and check alignment at each joint, making sure the top rail runs smoothly along the full curve.

Before we finish, we confirm that the height and spacing meet the requirements of the Israeli railing standard SI 1142. Exact values are checked together with your engineer, so you can be confident the railing is safe and compliant.

Frequently asked questions

Can you make a railing for a balcony that is both curved and angled?

Yes. Irregular balconies with combined curves and corners are measured point by point and drawn as one continuous layout. The approved drawing guides fabrication so the sections join correctly on site.

Do I need to be home for the measurement?

It helps to be present so we can discuss the layout and any fixing points or obstacles. If you cannot attend, send clear photos and details beforehand and we will confirm what we need.

Which materials work best for curved railings?

Steel, aluminum and stainless steel can all be shaped to a curve, and the best choice depends on the look you want and the exposure of the balcony. We recommend the material during the planning stage.

Will the railing meet safety requirements?

We build to the Israeli railing standard SI 1142 in general terms, and specific height and spacing values are verified with your engineer. This ensures the final railing is both safe and compliant.

Common mistakes to avoid

The most common mistake is ordering a straight standard panel and cutting it to fit a curve, which leaves gaps and weak joints. Another is skipping the written approval, which can lead to a railing that looks different from what was expected.

Our recommendation

Send photos from several angles and mark any fixing points or columns before the visit, and ask for a drawing to approve before production begins. This saves time and ensures the curve fits your balcony exactly.

Summary

Curved and irregular balconies need railings measured, drawn and fabricated to their exact shape. A custom approach from measurement to installation gives a secure, clean and long-lasting result.

השאירו פרטים ונחזור אליכם