Custom Metal Planters for Architectural Projects | Techno Kol Uzi

t503-46

Custom metal planters for architectural projects are built to your exact drawings, dimensions and finish, using steel or aluminum that suits the site and its load. Techno Kol Uzi manufactures them in its Tel Aviv factory, with on-site measurement, written specification and client approval before production begins.

What Architectural Metal Planters Are

Architectural metal planters are containers and planting elements designed as part of a building or landscape, not as off-the-shelf pots. They can be freestanding, integrated into a railing, built into a seating edge, or set along a path to define space. Because they are part of the design, their proportions, joints and surface treatment matter as much as the plants they hold.

Custom work lets the designer control the geometry, the profile of the metal and the way the planter meets the surrounding paving or wall. Each piece is made from your drawing rather than chosen from a catalogue.

Materials and Finishes We Work With

The main materials are steel and aluminum, chosen according to where the planter will stand and how it will be used. Steel offers strength and a solid visual weight, while aluminum is lighter and easier to move or fix to a structure.

Hot-dip galvanized steel for outdoor corrosion protection
Powder-coated finishes in colors matched to your palette
Stainless steel for a clean, modern look

We discuss exposure to weather, sun and salt air before recommending a finish, so the planter keeps its appearance over time.

Design Considerations for Landscape Projects

A planter must suit the plants and the soil volume it holds. Drainage holes, a removable liner or a bottom reservoir are details to decide early, not after installation. Height and width should also respect the seating and circulation around the piece.

If the planter carries a load, such as a tree, a wall or a heavy soil mix, the structure must be checked with your engineer. We can advise on fabrication details, but final structural values come from the project engineer.

Our Process from Inquiry to Installation

The work begins with an inquiry, ideally with photos and your rough drawings. We then visit the site to measure and confirm how the planter will meet the ground or structure. From these measurements we prepare a drawing and a written specification.

Once you approve the drawing and specification, production starts in our factory. Finishing, such as hot-dip galvanizing or powder coating, is done before the piece is delivered and installed on site.

Working with Architects, Designers and Committees

Landscape designers, architects, interior designers, contractors and building committees all order site furnishings from us. Each group usually needs a clear drawing, a material choice and a schedule that fits the wider project.

We keep communication direct, so questions about dimensions, joints or finishes are answered with the person who will sign off the work. This reduces revisions and keeps the installation on track.

Planning Your Order Well

To get the best result, send your drawings early and note the exact location, orientation and any services or paving that affect the installation. Tell us about the plants and soil so the planter is sized and drained correctly.

Site plan with dimensions
Preferred material and color
Access route for delivery and installation

Clear information at the start keeps production efficient and the finished piece accurate.

Frequently asked questions

Can you make a planter to an exact custom design?

Yes, we build planters from your drawings and written specification. We confirm dimensions on site before production so the piece fits the space.

Which metal is best for an outdoor planter?

Hot-dip galvanized steel and powder-coated finishes suit most outdoor sites. Stainless steel is a good choice where a clean, modern look is wanted, and we advise based on exposure.

Do you install the planters on site?

Yes, installation is part of our process after the piece is finished in the factory. Installation details are agreed with you during the planning stage.

Should the structural load be checked by an engineer?

Yes, if the planter carries a tree, a wall or heavy soil, the structure should be verified by your project engineer. We can support the fabrication details.

Common mistakes to avoid

A common mistake is leaving drainage, soil volume and load until after the design is fixed, which often forces costly changes. Another is choosing a finish without considering sun, salt air and the surrounding materials.

Our recommendation

Send a site plan with dimensions and a note on the plants and soil before the design is final, so drainage and structure can be built in from the start. Agree the material and finish with the project engineer and landscape designer together.

Summary

Custom metal planters work best when the drawing, material, finish and load are settled early and checked on site. Techno Kol Uzi builds them to your specification in Tel Aviv.

השאירו פרטים ונחזור אליכם