Custom Stainless Steel Shower Drain Covers Made to Measure

t470-22

A custom stainless steel shower drain cover is a grate cut and finished to the exact dimensions of your shower floor opening, so it sits flush with the tiles. We measure on site, produce the cover in our factory, and match the finish to your bathroom. This avoids the gaps and uneven edges that standard off-the-shelf covers often leave.

Why Standard Drain Covers Often Do Not Fit

Shower drains come in many sizes, and tile setters rarely cut the opening to a standard dimension. A ready-made cover may be slightly too large or too small, leaving a visible gap or a cover that rocks under foot. Both problems look untidy and can let debris collect at the edges.

When the cover is made from your own measurements, the fit is precise. The frame lines up with the tile joints and the surface stays level, which is what a renovation should look like when it is finished.

Choosing the Right Stainless Steel for a Shower

Bathrooms are wet and often humid, so the material matters. Stainless steel resists rust well and is easy to keep clean. We discuss the grade and finish with you before production so the cover suits how the room is used.

Brushed finish that hides water spots and scratches
Polished finish for a more reflective, modern look
Grate pattern chosen for drainage and foot comfort

How the Measuring Process Works

The process begins with photos of the drain area and the tile layout. We then visit the site to measure the opening accurately, including the depth of the channel and any slope toward the drain. These details shape the frame and the way the cover sits.

After measuring, we prepare a written drawing and specification and send it for your approval. Nothing goes into production until you have confirmed the dimensions and the finish.

Manufacturing and Finishing in Our Workshop

Each cover is cut, shaped and assembled in our factory on Rival Street in Tel Aviv. We work with iron, aluminum, glass and stainless steel, so the same care that goes into our railings and gates goes into drain covers. Edges are finished smooth so they are comfortable underfoot and easy to clean.

Because the covers are made in-house, we can adjust details such as frame width and grate spacing to suit the specific shower.

Installation Alongside Your Tile Work

The cover is best installed in coordination with the tile setter. The frame must be set at the correct height relative to the finished tile surface, so timing matters. We recommend agreeing on the sequence with your contractor before tiling begins.

Once in place, the cover should sit flat with no movement. If anything feels uneven, we check the fit together before the job is considered complete.

Caring for Your Stainless Steel Drain Cover

Stainless steel is low maintenance, but a few habits keep it looking good. Rinse the cover regularly and wipe it dry to limit water marks. Avoid abrasive pads and harsh cleaners that can dull the surface or leave scratches.

Clear hair and soap residue from the grate so water keeps flowing freely toward the drain.

Frequently asked questions

Can you make a drain cover for any tile size?

Yes. We make covers to the dimensions measured on your site, so the size follows your shower opening rather than a standard catalog size.

Do I need to send measurements before you visit?

Photos of the drain area help us prepare, but we take the final measurements on site so the fit is exact.

Is stainless steel suitable for a wet shower area?

Yes, stainless steel is well suited to bathrooms because it resists corrosion when cleaned and dried regularly.

Can the finish match my other bathroom fittings?

We can discuss a brushed or polished finish with you so the cover complements the rest of your bathroom.

Common mistakes to avoid

The most common mistake is ordering a cover before the tiles are laid, which can cause the frame to sit too high or too low. Another is choosing a size without measuring the actual opening.

Our recommendation

Measure the drain opening after the substrate is prepared and agree the cover dimensions with your tile setter before tiling starts. A custom cover made from accurate on-site measurements is the most reliable way to get a flush, lasting result.

Summary

Custom stainless steel shower drain covers are measured, made and finished to fit your tile floor exactly, giving a neat and durable result.

השאירו פרטים ונחזור אליכם