Fly Screen and Mosquito Net Integration in Aluminum Windows

t404-20

A fly screen for aluminum windows is best planned at the design stage, so the screen track, frame depth and opening direction are built into the window rather than added later. Measure the actual opening, decide between a fixed, sliding or hinged screen, and confirm the mesh type and frame finish before production. Done this way, the screen fits cleanly, opens smoothly and keeps mosquitoes out without blocking airflow.

Why plan the fly screen before ordering the window

In warm climates, insects are a daily problem for anyone who keeps windows open. The easiest and cleanest solution is to plan the fly screen together with the aluminum window, not as an afterthought. When the screen is designed into the frame, the profiles, track and seals are chosen to work together, and the result looks intentional instead of improvised.

Planning early also helps with the room layout. Furniture, curtains and blinds all interact with how a screen opens, so it is worth thinking about the whole window as one unit.

Measuring the opening for a screen

Measurements should be taken on site, because walls are rarely perfectly square and older openings can vary. Measure the width and height at the top, middle and bottom, and record the smallest figures for the screen. Note the depth of the frame, any obstructions such as shutter boxes or external railings, and the side on which the window will open.

Check each dimension at three points
Note the frame depth and sill height
Mark the opening direction and handle position
Photograph the surroundings for the drawing

Choosing the screen type and mesh

The most common choices are a fixed screen, a sliding screen that runs on a track, and a hinged screen that opens with the window. Sliding screens suit wide openings and balconies, while hinged screens are simple and tight. Fixed screens are useful where the window rarely opens.

For the mesh, fiberglass is light and widely used, while stainless or pet-resistant mesh is stronger and better where cats or heavy use are a concern. Choose a finish for the aluminum frame that matches the window so the screen looks like part of the whole.

From drawing to production in our factory

After the measurement, we prepare a drawing and a written specification showing the screen type, mesh, profile and finish. Once the client approves it, the parts are cut and assembled in our workshop at Rival Street 37 in Tel Aviv. Frame corners are joined precisely so the screen runs straight and sits tight against the window.

Finishing, such as powder coating, is applied in the production process so the screen and window share the same color and protection.

Installation and fit checks

Installation starts with fixing the window frame square and level, then fitting the screen track or hinges. The screen is tested for smooth movement, a snug fit at the edges and easy removal for cleaning. Small gaps are sealed so insects cannot enter through the sides.

It is worth testing the screen once with the window fully open and once closed to confirm there are no clashes with handles, blinds or the wall.

Keeping airflow and daylight in balance

A fly screen should stop insects without blocking the breeze that makes warm weather bearable. Mesh density affects both airflow and visibility, so a finer mesh offers better protection but slightly less air movement. Ask for a sample to view against daylight before deciding.

Positioning matters as well. Placing the screen on the inside of the window keeps it protected from weather and makes cleaning easier.

Frequently asked questions

Can a fly screen be added to an existing aluminum window?

In many cases yes, but the existing frame depth, opening style and track space must be checked on site. A custom screen designed around the current window usually gives the best fit.

Which fly screen is best for a balcony door?

A sliding screen is usually the most practical for a balcony door because it does not swing into the walking space. The track and mesh should be chosen for regular daily use.

Does a fine mesh reduce airflow a lot?

A finer mesh reduces airflow somewhat compared with a coarser one, but the difference is usually modest. Testing a sample helps you judge the balance for your own window.

Who should I contact to start the process?

You can send photos of the window and the surroundings, and we will arrange an on-site measurement and provide a written specification for your approval.

Common mistakes to avoid

Measuring only once or at a single point, and ordering a screen without checking frame depth and handle clearance. These two errors cause most fitting problems.

Our recommendation

Measure at three points on each side, decide the screen type before production, and ask for a mesh sample viewed against daylight. Confirm the handle and blind positions in the drawing so nothing clashes after installation.

Summary

Planning the fly screen together with the aluminum window gives a cleaner fit, smoother operation and better protection in warm weather. Accurate on-site measurement and an approved drawing are the key steps.

השאירו פרטים ונחזור אליכם