Full Gate Replacement Service for Homes and Yards

t279-5

A full gate replacement service removes your old gate, measures the opening on site, manufactures a new gate to fit, and installs it with proper alignment and finishing. At Techno Kol Uzi in Tel Aviv, every gate is made to measure in our factory, so it suits your entrance, your security needs and your style.

What a full gate replacement includes

A complete replacement is more than fitting a new panel onto old posts. It covers the removal of the existing gate, inspection of the posts and hinges, and the installation of a new gate built for your specific opening.

Careful removal of the old gate and its fittings
Inspection of posts, hinge points and the ground under the gate
Supply and installation of the new gate with hardware
Final adjustment so the gate opens and closes smoothly

Knowing what is included helps you compare offers on equal terms.

Start with an on-site measurement

Before any gate is manufactured, our team visits your property to measure the opening, check the slope of the ground and note where the posts sit. Small differences in width or height can affect how a gate swings, so precise measurement matters.

Please send photos of the current gate and entrance when you first get in touch. They help us understand the setup before the visit and prepare the right questions.

Choosing the right gate design

The right gate depends on how you use your entrance. A swing gate is a classic choice for a driveway or yard. A sliding gate suits a narrow entrance or a sloped driveway where a swinging panel would be awkward. Electric operation can be added to either type for convenience.

Swing gates for open, level entrances
Sliding gates for limited space or slopes
Solid or open-pattern panels for privacy or airflow

We discuss the options together and recommend what fits your home best.

How the work is carried out

Once you approve the drawing and written specification, the new gate is produced in our factory at Rival Street 37 in Tel Aviv. Production happens before installation, which keeps disruption at your home short. We then install the gate, set the posts and hinges accurately, and test the movement several times.

Finishing such as hot-dip galvanizing or powder coating is applied to protect the metal against weather, which is especially important in the Israeli climate.

Safety, alignment and everyday use

A gate should move freely and close fully without sagging. Good alignment protects the hinges and extends the life of the gate. For gates with motors or locks, we check that the mechanisms work reliably and that the gate stops safely when it meets an obstacle.

Where the gate forms part of a fence or railing, the design should also consider local safety expectations. Exact requirements are checked with your engineer during planning.

Preparing your property for replacement

A little preparation makes the process smoother. Clear the area around the entrance so the team can work safely, and let us know about any automatic systems, intercoms or cables near the gate. If a building committee or neighbour is involved, share the approved plan early.

Our team will confirm the steps and timing with you before work begins, so you know what to expect at every stage.

Frequently asked questions

Can you replace only the gate and keep the existing posts?

In many cases yes, provided the posts are straight, sound and suitable for the new gate's weight. We inspect them during the on-site visit and advise you honestly on whether they can be reused.

Do you measure the opening before making the gate?

Yes. Every gate is made to measure, so we visit the property to record the opening, the ground level and the post positions before manufacturing starts.

Can an electric motor be added during replacement?

Yes, an automatic operator can be included in the new installation. We will recommend a suitable setup for the gate type and size you choose.

How do I start a gate replacement inquiry?

Send us photos of your current gate and entrance, along with a short description of what you want to change. We will then arrange a convenient on-site measurement.

Common mistakes to avoid

Many homeowners order a gate based only on a rough measurement, which leads to fitting problems. Skipping a professional inspection of the posts and ground can also cause a new gate to sag or misalign soon after installation.

Our recommendation

Have the opening measured on site by the manufacturer before ordering, and ask for a written specification with the drawing. Choose a finish designed for outdoor exposure so the gate keeps its appearance for years.

Summary

A full gate replacement covers removal, measurement, custom manufacturing and professional installation. Measuring carefully and choosing the right design and finish gives you a gate that works well for years.

השאירו פרטים ונחזור אליכם