Get a Design Quote for Your Steel Frame Project

What a Steel Frame Design Quote Includes

A design quote is more than a number on a page. It describes what we intend to build and how it will look and perform. Depending on your project, it usually covers the frame layout, the profiles and materials proposed, the connection details, the finish, and the installation approach.

• Drawing or sketch of the frame and its dimensions
• Material and profile specification
• Finish: hot-dip galvanizing, powder coating, or stainless steel
• Installation notes and any items needing engineer sign-off

Having these details in writing lets you compare proposals on equal terms and avoids surprises later.

Information to Prepare Before You Contact Us

The faster we understand your project, the more precise the proposal. Gather a few basics before you reach out, even if some answers are rough.

• Photos of the location from several angles
• Approximate dimensions of the opening or area
• The purpose of the frame: structural support, a pergola, a stair, a gate, or decorative work
• Preferred style, such as a Belgian steel-look profile or a clean modern line

Sketches or reference images from magazines and online galleries help us grasp your taste quickly.

How the Design Process Works

Our process moves in clear stages so you always know where the project stands. We start with your inquiry and photos, then visit the site to measure accurately. Measurements matter, because a frame built to slightly wrong dimensions causes problems at installation.

From the measurements we prepare a drawing and a written specification. You review and approve it. Only after your approval does production begin in our factory on Rival Street in Tel Aviv, followed by finishing and installation.

Choosing Materials and Finish

Material and finish affect durability, appearance, and maintenance. For exterior frames exposed to weather, hot-dip galvanizing followed by powder coating is a common choice because it protects steel against corrosion over the long term. Stainless steel suits areas where a bright, low-maintenance look is wanted, and aluminum suits lighter applications.

Tell us where the frame will stand, including proximity to the sea or to direct sun, so we can recommend a suitable finish.

Safety and Structural Considerations

Frames that carry loads or form railings must meet proper safety requirements. In Israel, railings are governed by the standard SI 1142 among others. We do not replace engineering judgment: exact load and dimension values are checked with the structural engineer on your project.

Mention any intended use early, such as a balcony railing, a stair, or a frame supporting a roof, so the right checks are included in the design.

Reviewing and Approving Your Quote

Read the drawing and specification carefully before approving. Check the dimensions against your site, confirm the finish and the style, and ask about anything unclear. It is far easier to change a drawing than a finished frame.

• Confirm dimensions and the position of the frame
• Check the finish and colour
• Ask whether the engineer needs to review the design

Once you approve, we move to production with a shared understanding of the result.

Frequently asked questions

Do I need to be home for the site measurement?

It helps if you or a representative can be present to show the exact location and point out any site conditions. This avoids repeat visits and keeps the proposal accurate.

Can I get a design quote from photos alone?

Photos are a good start for understanding the project, but a site measurement is needed before a final drawing. Measurements taken on site prevent costly mistakes at installation.

Do you work with architects and contractors?

Yes. We work with private homeowners, building committees, contractors, architects, and interior designers, and we can share drawings in the format your team needs.

Will the frame need an engineer's approval?

For load-bearing or safety-critical elements, we recommend confirming the design with a structural engineer. We check the exact values together with the engineer on your project.

Common mistakes to avoid

Many clients send only a single photo without measurements, or approve a sketch without checking dimensions against the site. Both lead to delays and adjustments that could have been avoided.

Our recommendation

Measure the opening yourself roughly, note the wall material, and note the direction the frame faces before you contact us. Providing these details upfront gives you a more accurate and useful design quote.

Summary

A steel frame design quote turns your idea into a drawing and specification you can approve before production starts. Prepare photos and basic dimensions, and the process from measurement to installation stays clear and predictable.

Related guides

• Why Custom Steel Frames Improve Building Safety
• Order Custom-Colored Steel Frames for Your Building
• Child Safety Features in Steel Balcony and Railing Frames
• Request a Custom Steel Frame Design Consultation
• Steel Window Frames and Child Fall Prevention
• Selecting Steel Frame Styles for Commercial Buildings
• All models in this category