Glass Panel Gate Contemporary Design for Interior Entrances

t283-40

A glass panel gate contemporary design combines a slim metal frame with clear or tinted glass infill, creating a light, open entrance that still provides security. Techno Kol Uzi manufactures these gates to measure, in electric sliding or swing versions, for interior and parking entry spaces. Each project starts with on-site measurement and a written specification so the gate fits your design intent.

Why designers choose glass panel gates

Glass panel gates let daylight travel through an entrance and keep sightlines open, which suits contemporary interiors where transparency and material contrast matter. The glass acts as a visual layer rather than a wall, so the space feels larger while the gate still defines a clear threshold.

Designers often use them in lobbies, residential entries and parking access points where the gate should read as a design element. Because the frame is custom made, the profile thickness, finish and glass type can all be coordinated with the rest of the interior palette.

Sliding or swing: choosing the right mechanism

The mechanism depends on the space available and how the entrance is used. Each option has trade-offs that should be discussed before the drawing is finalized.

Electric sliding: suits wide openings and areas where a swing arc would be blocked.
Electric swing: suits narrower openings with clear space on one side.

We review the opening width, floor conditions and traffic flow together with the designer before recommending a mechanism.

Glass, frame and finish selection

The glass type affects privacy, light and safety. Clear, frosted, tinted and patterned glass each give a different character, and the choice should reflect how much visibility the client wants from both sides.

The metal frame can be finished in powder coating or hot-dip galvanized steel, in colours that match the interior scheme. Stainless steel and aluminum profiles are also options for a refined, minimal look. Final glass specifications are confirmed with our team during the drawing stage.

From inquiry to installation

Our process is designed to keep the design intent intact from the first sketch to the finished gate. Clients typically work through the following stages:

Send an inquiry with photos and the rough opening dimensions.
On-site measurement at the entrance.
Drawing and written specification for your approval.
Production at our factory on Rival Street in Tel Aviv.
Finishing and installation on site.

Safety and standards considerations

Glass panel gates must meet safety expectations for both people and vehicles. Edge treatment, glass specification and the clearance between moving parts are all points that need careful attention during design.

Where railings or guarding elements are part of the entrance, the Israeli railing standard SI 1142 applies in general terms. Exact dimensional requirements are verified with the project engineer, so designers should share the drawings early.

Coordinating with architects and contractors

Glass panel gates involve tight tolerances, so the gate, the wall structure and the electrical work should be coordinated before the opening is finished. Sharing the architectural drawings and the finished floor level early avoids costly adjustments on site.

We work directly with designers, architects and contractors, and we provide written specifications that can be included in tender documents or client presentations.

Frequently asked questions

Can a glass panel gate be fully electric?

Yes, both sliding and swing gates can be supplied with electric operators. The choice of operator is discussed during the drawing stage based on gate weight and usage.

Which glass types are suitable for a contemporary entrance?

Clear, frosted, tinted and patterned glass are common choices. The best option depends on the privacy and light levels the client wants.

Do you measure on site before producing the gate?

Yes, every project starts with an on-site measurement. The drawing and specification are prepared from those measurements and sent for approval.

Can the gate colour match my interior palette?

Frames can be finished in powder coating in a range of colours. Share your colour reference during the inquiry so we can plan the finish.

Common mistakes to avoid

A common mistake is finalizing the opening size before the floor finish is set, which can change the gate clearance. Designers should also avoid choosing glass without confirming the safety and privacy requirements of the space.

Our recommendation

Share the architectural drawings and finished floor level with us early, and ask for a written specification before approving the design. This keeps the glass, frame and mechanism aligned with your intent.

Summary

Glass panel gates offer a light, contemporary entrance that suits interior and parking spaces alike. Made to measure, they can be electric sliding or swing and finished to match your design scheme.

השאירו פרטים ונחזור אליכם