
Laminated Glass for Burglary-Resistant Windows: A Ground-Floor Guide
t445-8

Laminated glass is a safety glass made of two or more glass layers bonded with a tough interlayer, so it resists breaking through and stays in place when struck. For ground-floor windows, pairing laminated glass with a strong steel-look profile frame and proper locking hardware makes forced entry much harder.
How laminated glass resists intrusion
Laminated glass is built like a sandwich. Two sheets of glass are bonded together with a plastic interlayer, usually PVB or a similar material. When the glass is hit, it may crack into a web of fragments, but those pieces stay attached to the interlayer instead of falling out as an open gap.
This means an intruder cannot simply break a pane and reach the handle. The glass takes far longer to penetrate, which is the main reason it is recommended for ground-floor openings.
Why the frame matters as much as the glass
Even the strongest glass is only as good as the frame holding it. A weak profile can be pried open long before the glass is tested. A steel-look profile window gives a firmer structure, and the glazing must be fixed securely into the frame so the pane cannot be pushed out.
- Solid profile with reinforced corners
- Concealed or tamper-resistant glazing beads
- Multipoint locking on the sash
Choosing the right glass build-up
Laminated glass comes in different thicknesses and interlayer types, and the right choice depends on the room, the exposure and your privacy needs. A thicker laminate and a stronger interlayer generally improve resistance, but the total build-up must still fit the frame and the opening.
Ask for the glass specification in writing, including the layers and interlayer, before approving the drawing. This keeps expectations clear.
Standards and what to confirm with your engineer
Glass used in windows and railings in Israel should comply with the relevant safety requirements, and the Israeli railing standard SI 1142 is one reference point for guarding structures. We do not quote exact load or thickness figures here, because these depend on the specific opening, wall, and building.
For any ground-floor opening, have the final glass and frame design checked with your engineer before production.
Locks, hardware and everyday habits
Glass is one layer of protection. Good hardware completes the picture. Multipoint locks, reinforced strikers and quality hinges make it harder to lever a sash open. Keep the window closed and locked when you are away, and avoid leaving keys or tools within reach of the opening.
Our process from measurement to installation
We start with your inquiry and photos, then measure on site at your home. Our team prepares a drawing and written specification that lists the frame profile, glass build-up and hardware, and you approve it before anything goes into production. Windows are made to measure at our Tel Aviv factory on Rival Street, finished, and then installed on site, so you know exactly what you are getting.
Frequently asked questions
Is laminated glass the same as security glass?
Laminated glass is one type of security glass, designed to resist breaking and stay in place when struck. Other security glazing options exist, and the right choice depends on your needs.
Can I add laminated glass to my existing window?
It is sometimes possible to replace the glass in an existing frame, but the frame must be strong enough and properly fitted. We check this during the on-site measurement.
Does laminated glass make a window unbreakable?
No glass is completely unbreakable. Laminated glass greatly increases the time and effort needed to gain entry, which is why it is valued for ground floors.
Will laminated glass reduce natural light?
Laminated glass lets through light much like standard glass. Tints and special interlayers can change the look, so discuss your preference when you send your inquiry.
Common mistakes to avoid
Choosing glass without considering the frame and locks is the most common error. A strong pane in a weak profile with simple latches leaves the opening vulnerable.
Our recommendation
Specify the frame, glass build-up and multipoint hardware together as one system, and have the design confirmed with your engineer before production.
Summary
Laminated glass, set in a strong steel-look profile with good hardware, is a practical way to make ground-floor windows more resistant to intrusion.
Related guides
- Security Glazing Options for Steel-Look Windows
- Anti-Lift and Anti-Jemmy Hardware for Entry Doors
- Security Bars and Grilles Compatible with Steel-Look Frames
- Multi-Point Locking Systems for Steel-Look Doors
- Smart Alarm Sensors for Windows and Doors
- Security Features of Belgian Steel-Look Profile Windows
- All models in this category
Send us photos of your window and we will arrange an on-site
עוד מדריכים ודפים בנושא
- Anti-Lift and Anti-Jemmy Hardware for Entry Doors
- Multi-Point Locking Systems for Steel-Look Doors
- Order Emergency-Compliant Doors for Your Property
- Safety Door Quote: Steel-Look Doors Built to Protect
- Request a Window and Door Safety Assessment in Tel Aviv
- Choosing a Qualified Installer for Safety Features
- Child-Proof Balcony Doors with Steel-Look Profiles
- Emergency Preparedness: Keeping Exits Clear in Your Building
- Burglar Alarm Compatibility with Your Windows
- Storm Shutters for Steel-Look Frames: What to Know
