Matching Security Bars for Symmetrical Facade Window Pairs

Why Symmetry Matters on a Building Facade

When two windows sit side by side or mirror each other across a facade, the eye notices any difference in bar pattern, height or finish. Matching security bars make the building look planned and cared for, and they avoid the patchwork effect that appears when each window is fitted at a different time.

Uniformity matters most on street-facing elevations, on building faces shared by several apartments, and on projects where the architect or building committee has set a common look.

Measuring Both Windows Together

Measure each opening separately, then compare the results. Even a well-built facade is rarely exactly identical from one window to the next, so the bars should be sized to each opening while keeping the same pattern.

• Record width, height and frame depth for every window in the pair.
• Note the position of the sill, the handle and any shutter box.
• Check whether the two windows are set at the same level.

Take photos from the outside so the designer can see how the pair reads together.

Choosing One Design for the Pair

Agree on one pattern before production starts. A single design sheet should show the bar spacing, the vertical and horizontal divisions, the profile size and the decorative motif, with the mirror arrangement marked clearly for the left and right window.

Mirrored designs are common in symmetrical facades: the left bar set is the reverse of the right. Mark which side is which so nothing is made the wrong way round.

Materials and Finish for a Consistent Look

Iron and aluminum bars can both be used, but mixing them on one facade is rarely a good idea. Choose one material and one profile for the whole pair so the surface texture and shade match.

Finish is equally important. Hot-dip galvanizing followed by powder coating gives a steady color across all pieces, provided every bar in the set is coated in the same batch. Ask for the color reference to be written on the specification.

Ordering Process from Inquiry to Installation

A clear sequence helps avoid mismatches. Send photos of the facade and the windows, then arrange an on-site measurement. Next comes the drawing and written specification, which the client approves before production.

Production is carried out in our factory at 37 Rival Street, Tel Aviv, so that all pieces for the pair are cut and welded together. After finishing, the bars are installed and the result is checked against the approved drawing.

Safety Checks and Standards

Security bars must also be strong enough for their purpose and fixed properly into the wall or frame. For railings and guards, the Israeli standard SI 1142 applies in general terms, and exact dimensions should always be confirmed with a qualified engineer before fabrication.

Fixing points should be checked on site, especially where the wall material differs between the two windows of the pair.

Frequently asked questions

Can two symmetrical windows have different bar patterns?

They can, but for a uniform facade it is better to use one pattern mirrored for the second window. Mismatched patterns are one of the most noticeable faults on a shared elevation.

Should both windows be measured on the same day?

Yes, measuring both openings during the same visit makes it easier to compare them and spot any differences in size or level before production begins.

Do matching bars need the same finish and color?

Yes. Ordering the whole set together and coating it in one batch keeps the color and surface consistent across all pieces.

Who checks that the bars are safe to install?

Fixing details and exact dimensions should be confirmed with a qualified engineer, and the installation is checked on site against the approved drawing.

Common mistakes to avoid

Ordering the two sides of a pair at different times or from different batches often leads to visible color and pattern differences. Measuring only one window and assuming the other is identical is another common error.

Our recommendation

Order the whole pair in one request, approve a single mirrored drawing, and have both sets finished in the same batch. This is the most reliable way to get a uniform facade.

Summary

Matching security bars for symmetrical facade windows come from one design, accurate measurement of both openings, and production of the full set together in one finish.

Related guides

• Reinforcing Ventilation Louvers With Steel Bars in Storage Room Windows
• Protecting Stairwell Windows in Apartment Buildings With Non-Obstructive Bars
• Choosing Bar Thickness for Garage and Workshop Windows Exposed to Impact
• Security Bar Options for Rooftop Terrace Access Doors and Windows
• How to Clean Aluminum Window Security Bars Without Scratching Them
• Replacement Hardware Kits for Older Sliding Balcony Security Doors
• All models in this category