Mosquito Screens for Steel-Look Profile Windows in Israel

t447-15

An insect screen can be integrated into a Belgian steel-look profile window so you keep airflow without letting mosquitoes in. The screen is sized and fitted to the frame during manufacturing or as an add-on, and the choice of frame and mesh depends on how the window opens.

Why Insect Screens Matter in Warm Climates

In hot months, most people want windows open at night, but mosquitoes and other insects make that difficult. A well-fitted insect screen lets fresh air move through the home while keeping pests out. For households in warm regions of Israel, this is one of the most practical upgrades you can make to an existing window or a new one.

Steel-look profile windows already offer clean lines and strong frames, so adding a screen should look like part of the design rather than an afterthought.

How Screens Integrate with Steel-Look Profiles

There are two common approaches. The first is a screen built into the window frame at the time of manufacture, with a discreet channel that hides the mesh when not in use. The second is an add-on screen fitted to the existing frame, which suits windows already installed.

Integrated channel: cleaner appearance, planned during the drawing stage
Add-on frame: suitable for retrofit, fixed to the outer profile
Sliding or pull-out options depending on the opening type

Choosing the Right Mesh and Frame Type

Mesh density affects both insect protection and airflow. A finer mesh blocks smaller insects but reduces the air passing through. For mosquitoes, a fine fiberglass or stainless mesh is usually the right balance. Choose a mesh that is durable and resists sagging over time, especially on larger openings.

The window type matters as well. Casement, tilt-and-turn and sliding windows each need a different screen mechanism, so the screen should be selected together with the opening style.

Our Process from Measurement to Installation

We start with an inquiry where you can send photos of your windows. Next comes an on-site measurement, followed by a drawing and a written specification that you approve before production begins. The screen frame and channel are made in our factory at 37 Rival Street, Tel Aviv, alongside the window profiles, so the fit is precise.

Finishing such as powder coating is chosen to match the rest of the steel-look frame. Installation is then carried out so the screen runs smoothly and seals properly against the frame.

Keeping the Screen Working Well

A screen needs only light care to perform well over the years. Rinse the mesh gently with water to remove dust, and check the edges and channel for debris that could slow the sliding or hinging action. Avoid pressing hard on the mesh, which can tear it or pull it out of its track.

Clean the mesh every few months
Keep tracks free of sand and grit
Check the seal around the edges each season

Planning Your Screen Before Ordering

Before ordering, decide which windows need screens and how each one opens. Note any obstacles such as shutters, railings or blinds that could affect the screen's movement. Measurements should be taken on site rather than estimated, because small differences can prevent a screen from fitting properly.

Mention your preferred look, whether the screen should be hidden or visible, so the drawing reflects your choice from the start.

Frequently asked questions

Can a mosquito screen be added to an existing steel-look window?

Yes, an add-on screen frame can often be fitted to an installed window. The window is measured on site to confirm the opening and the best fixing method.

Does a fine mesh reduce airflow a lot?

A finer mesh slows airflow slightly compared with an open window, but it still allows a good amount of fresh air through. The right mesh balances insect protection with comfort.

Is an integrated screen better than an add-on?

An integrated screen looks cleaner and is planned into the window from the start, while an add-on suits windows that are already installed. Both can work well depending on your situation.

What information should I send first?

Send photos of each window and the room it serves, and mention how the window opens. This helps us suggest the right screen type before the on-site measurement.

Common mistakes to avoid

Ordering a screen before measuring on site often leads to poor fit. Choosing a mesh without considering how the window opens can also cause functional problems.

Our recommendation

Decide the screen type together with the opening style, and choose a mesh that suits your local insect pressure rather than the finest option by default. Approve the written drawing carefully before production.

Summary

Insect screens for Belgian steel-look profile windows give you airflow without insects when built or fitted correctly to the frame and opening type.

השאירו פרטים ונחזור אליכם