Narrow Glass Vitrine Sizing for Pharmacy Shelves Behind Counters

t428-32

A narrow glass vitrine for pharmacy shelves behind a counter should be sized from the exact space available, the depth of the products stored, and the reach of the staff. It is made to measure from a site measurement, so every shelf height and glass panel fits the wall and the stock.

Start with the Space Behind the Counter

Before anything else, measure the wall space behind the counter at three heights: floor level, shoulder height and the top of the reachable area. Walls are rarely perfectly straight, so take the narrowest width and the shortest height as your working numbers.

Also note where pipes, sockets, door swings and drawers sit. A vitrine that blocks a door or a power point will need to be redesigned, so it is better to find these conflicts at the measuring stage.

Choose the Right Depth for Your Products

Depth decides how much stock each shelf holds and how easily staff can see labels. Packaging boxes, bottles and small tubes need different depths, so group products by size before drawing the layout.

Keep shallow shelves for small boxes and tubes.
Use deeper shelves only where bottles are stored.
Leave room for hands to reach the back without strain.

Plan Shelf Spacing and Load

Shelf spacing should follow the tallest product in each zone, with a small margin so items slide in and out easily. Adjustable spacing gives flexibility when new products arrive, but fixed spacing is stronger and simpler for narrow units.

Glass shelves need the right thickness for the load they carry. Your engineer confirms exact values for the span and weight, and the fitting method is chosen with that in mind.

Match Glass and Frame to the Setting

A clear glass vitrine lets customers and staff see stock at a glance, which suits a pharmacy counter. Frames can be slim aluminum or steel, depending on how the unit is mounted and how much the glass must support.

Consider the lighting and cleaning routine too. Smooth edges and accessible fixings make daily wiping faster and reduce dust build-up on the shelves.

The Measuring and Approval Process

At Techno Kol Uzi, sizing starts with photos of the area and a written inquiry. We then visit the site to measure, and draw the vitrine with a written specification that lists dimensions, glass, finish and fixings.

You review and approve the drawing before production begins. Once approved, the unit is manufactured in our Tel Aviv workshop and installed on site, so the final fit matches the plan.

Installation Behind a Working Counter

Plan installation for a time when the pharmacy can work around the noise and dust, often outside peak hours. Protect nearby stock and fixtures, and confirm where the unit will be fixed so the wall can take the load.

After installation, check that doors and drawers open fully, shelves sit level and the glass is secure. Small adjustments at this stage keep the unit working well for years.

Frequently asked questions

How narrow can a glass vitrine behind a pharmacy counter be?

The width depends on the space available and the products you need to store. We size each unit from a site measurement so it fits the gap without blocking access.

Do I need to measure the wall before ordering?

Yes, an on-site measurement is part of our process. It captures the real width, height and obstacles, which photos alone cannot show accurately.

Can the shelf height be adjusted later?

It can be, depending on the design you choose. Adjustable shelves offer flexibility, while fixed shelves are simpler and sturdier for narrow units.

Will I see a drawing before production?

Yes. You receive a drawing and written specification for approval, and production starts only after you confirm them.

Common mistakes to avoid

The most common mistake is measuring only once and at one height, which misses uneven walls and obstacles. Another is choosing shelf depth before knowing the product sizes.

Our recommendation

Measure the narrowest point and the products you will store first, then sketch the shelf layout before choosing glass and frame. Ask for a drawing and written spec so every dimension is agreed before manufacturing.

Summary

Size a narrow pharmacy vitrine from site measurements, product sizes and staff reach, then approve a written drawing before production.

השאירו פרטים ונחזור אליכם