Office Entrance Aluminum Fence Systems for Building Entrances

t298-12

An office entrance aluminum fence is a custom-made barrier that defines the building perimeter, controls access and gives the entrance a clean, professional look. Aluminum is lightweight, resists corrosion and can be finished in a range of colors to match the facade. Each system is designed on site after measuring the entrance and agreeing on the drawing with the client.

Why Offices Choose Aluminum for Entrance Fences

Office entrances carry a lot of daily traffic and need to look sharp year after year. Aluminum is a practical choice because it does not rust, it is light enough to handle without heavy equipment, and it keeps its shape over time. For building managers, this means fewer maintenance visits and a consistent appearance on the street side.

Aluminum also pairs well with glass, stone and steel facades that many modern offices use. A slim frame with clean vertical bars can separate the entrance area from the sidewalk without making the building feel closed off.

Design Options for the Building Entrance

The right design depends on how the entrance is used. Some buildings need a low fence that marks the boundary, while others need a taller system that works with a gate or an access control point. Common choices include:

Straight vertical bars with a flat top rail
Panel systems with a repeated pattern
Combined fence and glass panels for a more open look

Your architect or interior designer can help choose the profile and spacing that suit the building.

Measuring, Drawing and Approval

Every entrance is different, so we start with a site visit to measure the opening, the slope of the ground and any existing structures. After measuring, we prepare a drawing and a written specification showing dimensions, bar spacing, fixing points and finish. Nothing goes into production until the client has reviewed and approved the drawing.

Sending photos of the entrance before the visit helps us prepare and often shortens the process.

Production and Finishing in Our Factory

The fence is manufactured in our workshop at 37 Rival Street in Tel Aviv, where cutting, welding and assembly are carried out to the approved drawing. For outdoor use, we pay close attention to the surface finish. Powder coating gives a durable color that resists weather and daily wear, and the finish can be matched to windows, doors or signage on the building.

Components are checked before they leave the factory so that the installation on site goes smoothly.

Installation and Safety Considerations

Installation requires careful fixing to the floor, wall or base structure, and the fence must be level and stable. Railings and fence heights are checked against the Israeli railing standard SI 1142, and the exact technical values are confirmed with the engineer for each project.

Check the base structure before installation
Confirm gate swing and clearance
Plan the fixings for the type of surface

Maintenance for Long-Term Appearance

Aluminum needs very little care. Washing the fence with water and a mild cleaning solution every few months keeps the finish looking fresh, especially near the sea or on busy streets. Check the fixings and moving parts such as gates once or twice a year to make sure everything still runs smoothly.

If a section is damaged, a single panel can often be replaced rather than the whole fence.

Frequently asked questions

Can the aluminum fence be matched to our building colors?

Yes. The powder coating can be selected to match the windows, doors or facade elements of the building. Your architect can provide the color reference to make the choice easier.

Do you measure the entrance on site before making the fence?

Yes. We visit the site to measure the opening, ground conditions and existing structures before preparing the drawing. The fence is only produced after the client approves the drawing.

Is aluminum suitable for a busy office entrance?

Aluminum is well suited to busy entrances because it is durable, lightweight and resistant to corrosion. It keeps its appearance with simple cleaning and occasional checks of the fixings.

Can an entrance fence include a gate?

Yes. Gates can be designed as part of the fence system, and we confirm the swing direction and clearance during the measuring stage so the gate works correctly with the entrance.

Common mistakes to avoid

The most common mistake is choosing the fence design before measuring the site, which can lead to gate clearance problems or a poor fit with the building. Another is ignoring the surface finish, since an unsuitable coating can wear quickly on a busy outdoor entrance.

Our recommendation

Send photos of the entrance and a rough sketch of the desired layout before the site visit, and ask for a written drawing to approve before production begins. This keeps the project on track and avoids changes after installation.

Summary

Office entrance aluminum fence systems combine durability, clean design and easy maintenance. Each one is made to measure in our Tel Aviv factory after an on-site visit and approved drawing.

השאירו פרטים ונחזור אליכם