Order Tempered Glass Railings Built to Safety Standard

t347-38

To order tempered glass railings built to safety standard, specify the glass type, thickness, fixing system and railing height in a written drawing before production, and confirm the design against the Israeli railing standard SI 1142 with your engineer. Techno Kol Uzi manufactures glass railings to measure at its Tel Aviv factory, following a process of on-site measurement, drawing, client approval, production and installation.

What a safety standard means for glass railings

A glass railing is a barrier that people lean on, walk beside and sometimes lean against with children nearby, so its safety depends on more than the glass itself. In Israel, railing design is guided by the standard SI 1142, which sets the general requirements for height, strength and the way a railing must resist loads. The exact numerical values depend on the building type and location, so they should always be confirmed with the project engineer rather than taken from a general guide.

When you order, ask the factory to build according to the standard that applies to your project and to note this in the written specification.

Choosing tempered glass and the right thickness

Tempered glass is heat-treated to be significantly stronger than standard annealed glass, and when it breaks it shatters into small, relatively blunt pieces rather than sharp shards. For railings, the glass type, thickness and laminated or non-laminated build are chosen according to the span between supports, the height of the railing and the expected loads. A thicker or laminated panel generally offers more security, especially where glass could be exposed to impact.

Confirm the glass type and thickness in the drawing
Ask whether laminated tempered glass is recommended for the location
Keep the specification with the approved drawing

Fixing systems and the structure behind the glass

The glass is only as safe as the way it is held. Common approaches include base-mounted channels, top rails with glass clamps, and spigot or point-fixed systems. The fixings must be designed for the loads they carry and matched to the substrate, whether concrete, steel or a balcony slab. Stainless steel fittings, properly sized anchors and correct edge distances are part of a well-built railing.

Ask the factory to show how each panel is supported and how the anchors connect to the building structure.

Height, gaps and the details that matter

Height and openings are part of the standard, and small details such as the gap between panels, the height of the handrail and the spacing of any vertical elements affect safety for children and adults alike. Edges should be finished smoothly, and any hardware should be fixed so that it cannot loosen. Because these values are set for each project, the measurements should be taken on site and checked against the drawing before production begins.

How we work from inquiry to installation

Techno Kol Uzi, operating since 1945 from 37 Rival Street in Tel Aviv, manufactures glass railings to measure for developers, contractors, architects and private owners. The process begins with an inquiry and photos, followed by on-site measurement, a drawing and a written specification that lists the glass, fixings and finishes. Once the client approves the drawing, the railing is produced in the factory and then installed on site.

Inquiry with photos and project details
On-site measurement
Drawing and written specification
Client approval
Factory production and installation

Checklist before you place the order

Before signing off on a balustrade order, make sure the drawing states the glass type and thickness, the fixing method, the railing height, the finish and the installation method. Confirm that the design has been reviewed against the applicable standard by your engineer. A clear checklist protects the project from changes later and keeps the installation schedule on track.

Keep a copy of the approved specification with the project documents for future reference.

Frequently asked questions

Is tempered glass safer than regular glass for railings?

Yes, tempered glass is heat-treated to be much stronger than standard glass, and when it breaks it fragments into small, less hazardous pieces. Your engineer should still confirm the thickness and type for your specific project.

Which standard applies to glass railings in Israel?

The Israeli railing standard SI 1142 is the general reference for railing requirements. Your project engineer should confirm how it applies to your building and the exact values needed.

Should I send photos before ordering?

Yes, photos and project details help us understand the site, and we then take exact measurements on site before preparing the drawing.

Can the railing be adapted to my building's structure?

Yes, each railing is built to measure, and the fixing method is chosen to suit the substrate, whether concrete, steel or a balcony slab.

Common mistakes to avoid

A common mistake is ordering glass railings from measurements taken without a site visit or without confirming the fixing method and loads. Skipping the written specification and engineer review often leads to costly changes after production has started.

Our recommendation

Approve a detailed drawing with the glass type, thickness, fixings and height written down, and have your engineer check it against SI 1142 before production begins. This single step prevents most problems on site.

Summary

Ordering tempered glass railings built to safety standard means defining the glass, fixings and height in a written, engineer-checked specification before production. Techno Kol Uzi builds these railings to measure from a drawing you approve.

השאירו פרטים ונחזור אליכם