Ordering a Custom Electric Gate: Design Options and Process

Choosing Between Sliding and Swing Designs

The first decision is the movement type. A sliding electric gate runs along a track and suits driveways where there is little space in front of or behind the entrance, because it does not swing into the drive. A swing gate opens outward or inward on hinges and is often chosen for wider openings and a more traditional look.

• Sliding: saves space, works on slopes, needs a clear track path
• Swing: classic appearance, needs open space for the leaves to move

Think about how you enter and exit daily, and which side of the property has room to work with.

Matching the Gate to Your Home Style

A gate should complement the façade, fence and landscaping. Simple vertical bars give a clean, modern line, while decorative scrolls or perforated panels suit more classic homes. Solid panels offer privacy, and open designs let you see the garden from the street.

Bring photos of your house and fence to your first conversation. This helps the designer propose proportions and patterns that look balanced from the road.

Measuring Your Entrance Properly

Accurate measurements prevent problems later. The factory typically arranges an on-site measurement that records the opening width, the ground level, the slope, and the space needed for the leaves or the sliding track. Note any obstacles such as posts, utility boxes or drain covers, since they affect the mechanism.

Ground conditions matter too. Uneven or sloping surfaces may require adjustments to the track or the hinge positions, so mention them early.

Adding Features and Finishes

Beyond the basic structure, you can choose the motor type, remote controls, intercom or keypad integration, and safety sensors. Finishes protect the steel and set the colour. Hot-dip galvanizing gives strong corrosion protection, and powder coating offers a wide range of colours and textures.

• Motor and automation package
• Remote, keypad or intercom access
• Safety sensors and photocells
• Galvanizing plus powder-coat colour

From Drawing to Approval

After measurement, you receive a drawing and a written specification describing materials, dimensions, mechanism and finish. Review it carefully and ask questions about anything unclear. Your written approval is the signal for production to begin, so changes are best made at this stage rather than after fabrication.

The gate is then built in the factory, finished, and installed on site, with the installation coordinated around your schedule.

Planning the Installation Site

Before installation day, make sure the area is clear and the foundations or posts are ready as agreed. Electrical supply for the motor should be in place, and the cable route should be discussed in advance. Confirm who handles the electrical connection so there is no delay.

For railings and safety-related parts, the Israeli standard SI 1142 is the general reference, and exact values are checked with the engineer for your project.

Frequently asked questions

How long does the ordering process take?

The timeline depends on the complexity of the design and the current workload, so the factory confirms it when your specification is approved. Ask for the schedule at the quotation stage.

Do I need to provide a drawing myself?

No. You can send photos and rough dimensions, and the factory prepares the drawing after an on-site measurement. Your input on style and function guides the design.

Can a sliding gate be installed on a slope?

Often yes, since a sliding gate runs horizontally on a track. The track and ground preparation are adjusted to suit the slope, so share the site conditions when you inquire.

Can the gate match my existing fence?

Yes. The design can echo the pattern, height and colour of your fence or façade. Bring photos so the designer can propose a matching or complementary style.

Common mistakes to avoid

Many buyers choose a design before measuring the space, which leads to a gate that cannot swing or slide freely. Skipping a careful review of the written specification can also mean changes are needed after production has started.

Our recommendation

Measure the entrance together with the installer and mention every obstacle and slope, then compare sliding and swing options against your daily use before approving the drawing.

Summary

Ordering a custom electric gate works best when you start with photos, accurate measurements and a clear view of how you use the entrance. Careful review of the drawing and specification leads to a gate that fits your property and your daily routine.

Related guides

• Maintaining Powder-Coated Gate Colors Over Time
• Viewing Gate Design Samples and Finish Swatches
• Keeping Stainless Steel Gates Looking Fresh
• Requesting a Custom Gate Design Consultation
• Design Ideas for Gates Seen from the Street and the Inside
• Questions to Ask Before Finalizing Your Gate Design
• All models in this category