Ordering Custom Sizes of Steel-Look Profile Windows

t434-42

Custom steel-look windows are made to the exact dimensions of your opening, so odd sizes, tall spans and unusual shapes can still get a clean, consistent steel appearance. The process starts with an inquiry and photos, followed by on-site measurement, a drawing and written specification for your approval, then production and installation.

Why Non-Standard Openings Need Custom Work

Many older apartments, renovated balconies and new buildings with unusual design have openings that do not match standard window sizes. Forcing a standard frame into a non-standard opening often leaves gaps, weak sealing and an awkward look. Custom steel-look profile windows solve this by being built around your actual opening.

Made-to-measure production also lets you choose the number of sections, the opening direction and the position of the frame so the window fits the facade rather than the other way round.

Start with an Inquiry and Clear Photos

The first step is to contact us with photos of the opening, the surrounding wall and the room the window serves. Include a rough description of how the window should open and whether it faces the street, a balcony or an inner courtyard.

Photos taken straight on, plus one from a slight angle
Notes on the wall material and any existing frame
Your preferred opening style and color preference

On-Site Measurement

Accurate measurement is the foundation of a good custom window. A specialist visits the site and measures the opening width and height at several points, since walls are rarely perfectly square. The depth of the wall and the position of any sills, lintels or tiles are also recorded.

Measuring at more than one point is important because a small difference between top and bottom can affect how the frame sits and seals.

Drawing and Written Specification for Approval

Before production starts, you receive a drawing and a written specification showing the overall dimensions, profile layout, opening directions and finish. Read it carefully and check every dimension against your own notes or the site plan.

Approval at this stage is important, because changes after production are costly and slow things down. If anything in the drawing looks unclear, ask before you sign off.

Production in the Factory and Finishing

Once approved, the profiles are cut, welded and assembled in our factory on Rival Street in Tel Aviv. Steel-look profiles are finished to protect them against the weather, usually with hot-dip galvanizing as a base and powder coating for the final color and texture.

Producing in the factory allows careful quality control before anything reaches the site, which reduces surprises during installation.

Installation and Final Check

Installation is carried out with the frame set plumb, level and properly sealed to the wall. After fitting, the opening and closing action is tested and the seals are checked for smooth operation.

Ask the installer to walk through the operation with you and point out any adjustments, so you know how to care for the window in daily use.

Frequently asked questions

Can you make steel-look windows in any size?

Custom production is built around your measured opening, so the size is set by your wall. Exact feasibility for unusual dimensions is confirmed during measurement and drawing.

Do I need to be home for the measurement?

It helps to be present so the specialist can confirm the opening and discuss the layout with you. Access to the balcony or room should be arranged in advance.

How do I know the drawing is correct?

Check each dimension in the drawing against your site notes and photos before approving. If something does not match, raise it before production begins.

Are steel-look profile windows suitable for exposed balconies?

They are commonly used in exposed locations because of their protective finish. Confirm the exact profile and finish suited to your exposure during the consultation.

Common mistakes to avoid

The most common error is measuring only once or in one place, which misses wall irregularities. Approving a drawing without checking every dimension against the actual opening also causes avoidable problems.

Our recommendation

Measure the opening at the top, middle and bottom, and take a photo with a tape measure in view. Keep these notes with your drawing so you can verify the final dimensions before approving.

Summary

Custom steel-look windows fit your exact opening through a clear process of inquiry, measurement, approved drawing, factory production and careful installation. Accurate measurement and drawing approval are the keys to a good result.

השאירו פרטים ונחזור אליכם