Pedestrian Gate With Vehicle Gate: Planning Your Entry

t287-41

A pedestrian gate with a vehicle gate gives you a separate walk-through entrance so you do not have to open the large electric gate for every trip on foot. Plan its position, swing direction, and locking method together with the vehicle gate so both work smoothly on one property.

Why add a separate pedestrian gate

Opening an electric parking gate for a short walk to the street wastes time, uses the motor more often, and leaves the driveway exposed. A dedicated walk-through gate solves this and gives visitors, couriers, and residents a convenient entry that stays closed when the vehicle gate is in use.

Many owners add it during installation, because fitting both gates in one project makes the posts, foundation, and wiring simpler and more consistent in appearance.

Choosing the position and layout

The pedestrian gate is usually placed beside the vehicle gate, on the same fence line, or set into a side wall. Pick a spot that gives a clear, level path from the street and does not force people to walk through the vehicle travel area.

Keep a comfortable walkway width with no steps on the approach.
Check that the vehicle gate's open arc does not block the pedestrian opening.
Consider lighting and visibility from the house for security.

Swing direction and clearance

Decide whether the pedestrian gate should open inward or outward. Outward opening is common on street fences because it keeps the walkway clear, but it must not swing over the sidewalk in a way that creates a hazard for passers-by.

If the vehicle gate is a sliding type, the pedestrian gate has no conflict with its track. With a swing vehicle gate, measure carefully so the leaves never meet or trap a hand or foot. Exact clearance values should be confirmed with your engineer during measurement.

Locking and access control

A walk-through gate should be secured independently from the vehicle gate so one closed does not depend on the other. Common choices include a mechanical lock, an electric strike, or a keypad or remote control that works alongside the vehicle gate system.

Think about who needs access and when. Residents may want a remote for convenience, while delivery workers may only need a code. Make sure the chosen system fits your daily routine rather than adding friction.

Safety and standards for railings and fences

Pedestrian openings need to be safe for children and pedestrians. Edges should be smooth, pinch points avoided, and any gap or railing designed to meet the relevant Israeli railing standard, SI 1142, in general terms. Exact dimensional requirements should be checked with the engineer for your specific site.

Consider automatic closing with a spring or closer, so the gate does not stand open after someone passes through. Good hinges and a sturdy frame keep the gate aligned over years of daily use.

What to specify before ordering

Before requesting a quote, gather the information that lets the workshop design the right solution the first time. A clear brief shortens the back-and-forth and helps avoid changes during installation.

Photos of the entrance and the surrounding wall or fence.
Desired width for the walk-through opening and the vehicle gate type.
Preferred swing direction and locking method.
Finish preference, such as galvanizing with powder coating.

Our team measures on site, prepares a drawing and written specification, and confirms everything with you before production at our Tel Aviv factory.

Frequently asked questions

Can a pedestrian gate be installed next to an existing electric vehicle gate?

Yes, in many cases it can be added beside an existing vehicle gate if there is enough space and a suitable post or wall. An on-site measurement is needed to confirm the layout and locking options.

Should the pedestrian gate open inward or outward?

It depends on the space in front and behind the gate and on safety near the street. Outward opening keeps the walkway clear, while inward opening protects the gate from the outside, and both should be checked on site.

Can one remote control open both the vehicle gate and the pedestrian gate?

This depends on the access system chosen, since some setups use a shared keypad or remote while others keep the pedestrian gate on a separate lock. We will explain the options during the consultation.

Do I need to follow a standard for the pedestrian gate?

Railings and fences around entrances are commonly designed with reference to the Israeli standard SI 1142. Exact requirements for your site should be confirmed with your engineer.

Common mistakes to avoid

Many owners forget to check the vehicle gate's open arc against the walk-through opening, and they choose a swing direction without considering the sidewalk and passing pedestrians.

Our recommendation

Plan the pedestrian gate together with the vehicle gate from the start, measure the full entrance on site, and choose a locking method that matches how people actually use the property.

Summary

A pedestrian gate with a vehicle gate adds convenience and safety when its position, swing, clearance, and locking are planned together from the beginning.

השאירו פרטים ונחזור אליכם