Replacement Glass Shelves Cut to Exact Vitrine Dimensions

t428-11

Replacement glass shelves cut to size are made from a precise measurement of your existing vitrine, including width, depth, the shelf support points and the glass thickness. Providing these measurements and a photo lets the workshop cut and finish each shelf so it fits your cabinet without rework.

Why custom-cut glass shelves are the right choice for vitrines

Worn display cabinets rarely have shelves that are still sold in standard sizes. Shelves that are slightly too wide, too deep or the wrong thickness can rock, chip at the corners or fail to sit on their supports. A shelf cut to the exact dimensions of your vitrine sits level, fits the side channels or pins cleanly and looks like it was part of the original cabinet.

Custom cutting also means you can choose the glass type and edge finish that suit the display. A polished edge is usually preferred for shelves that are seen from the front, while the same shelf might be used in a cabinet where the edges are less visible. Whatever the case, the shelf is made to your specification, not adapted to whatever is in stock.

What to measure before you order

Accurate measurements are the most important part of the order. Measure each shelf opening rather than relying on the original drawing, because cabinets are often built slightly differently from one unit to the next.

Inside width and depth of the space where the shelf sits
The position and type of supports: side grooves, pins or brackets
Clearance on each side, so the shelf can be lifted in and out
The current glass thickness, measured with a caliper if possible
Any cutouts, notches or lighting channels that the shelf must clear

Sending photos and drawings for an exact fit

Along with the numbers, send clear photos of the cabinet interior and of the existing shelf supports. A photo from the side and one from the front help us see how the shelf rests and where the edges will be visible. If you have a sketch with dimensions marked, that is helpful too.

If the cabinet is damaged or the original shelves are missing, a short note describing the vitrine's use, such as jewelry, collectibles or products on display, helps us recommend a suitable glass thickness and edge finish for the load and the look you need.

Glass thickness, edge finish and safety

Thickness must match the span and the weight the shelf will carry. Glass that looks adequate can flex under heavier items, so the thickness is confirmed with you before cutting. Edge finish is also selected for safety and appearance: a ground or polished edge removes sharp corners that could cause injury during handling or cleaning.

Safety glass options are available for shelves in high-traffic areas, and the specification is reviewed with you so the choice matches how the cabinet is used.

Our order process from measurement to delivery

Once you send your inquiry and photos, we review the details and may arrange an on-site measurement when the cabinet is hard to measure remotely. You then receive a written specification listing each shelf's dimensions, glass type and edge finish for your approval. Only after you confirm do we cut and finish the glass in our Tel Aviv workshop at 37 Rival Street.

Shelves are checked against the measurements before they leave the factory, which reduces the chance of a second visit. Delivery and fitting are arranged according to the agreed schedule.

Tips for a smooth replacement

Before the new shelves arrive

Clean the cabinet interior and remove old fragments of glass or adhesive. Check that the supports are secure, since a loose bracket can make even a perfect shelf look uneven. Keep the original packaging or spacers in case they are needed for transport within the building.

Plan to lay the new shelves in one at a time, starting from the bottom, and test that each one sits level before loading it with display items.

Frequently asked questions

Can you cut glass shelves to any size for my vitrine?

We cut shelves to the exact dimensions you provide after measuring the cabinet opening and its supports. Each order is confirmed with a written specification before production.

Do I need to take the old shelf out to measure?

Not always. Measuring the open cabinet interior is often enough, but if the shelf is the only reference, we can arrange an on-site measurement to make sure the fit is right.

What glass thickness should I choose for a display shelf?

Thickness depends on the span and the weight of the items displayed. We recommend a thickness during the consultation, based on your cabinet and how it will be used.

Are the cut edges safe to handle?

Yes. Edges are finished by grinding or polishing so there are no sharp corners, and safety glass can be selected for busier areas.

Common mistakes to avoid

The most common error is cutting shelves from an old drawing without measuring the actual opening, which leads to shelves that bind or rock. Measure each shelf position separately, because cabinets often vary slightly.

Our recommendation

Measure the opening at the top, middle and bottom and use the smallest figure, leaving a few millimetres of clearance on each side. Send that set of numbers together with photos of the supports so the cut shelf fits on the first attempt.

Summary

Custom-cut replacement glass shelves give a precise fit for worn display cabinets when you provide accurate measurements, photos and clear requirements for thickness and edge finish.

השאירו פרטים ונחזור אליכם