Request a Quote for Stainless Steel Security Gates

t473-34

To get an accurate quote for a stainless steel security gate, send photos of the opening, the gate type you have in mind, and any access or automation needs. Techno Kol Uzi then measures on site and issues a written specification before production begins.

What to prepare before you ask for a quote

A useful quote starts with good information. Take clear photos of the opening from a few distances, including the posts, walls and the ground surface. Note whether the gate swings or slides and which side the vehicle or pedestrian access comes from.

Approximate opening width and height
Type of access: vehicle, pedestrian or both
Whether automation or an intercom is planned
Any architectural drawings or style references

The more complete your first message, the fewer questions we need to ask before drafting the specification.

What affects the scope of a stainless steel gate

Stainless steel gates are chosen for corrosion resistance and a clean finish, especially near the coast. The scope depends on the grade of stainless steel, the frame and infill design, the weight of the leaves, and the hardware that carries them.

Automation, locks, access control and the surface finish also change the work involved. Each of these items is listed separately in the written specification so you can see exactly what is included.

How the measurement and drawing stage works

After your inquiry, we arrange an on-site measurement. The team checks the opening for level, plumbness and clearance, and notes any obstacles such as slopes, curbs or utility lines that affect the swing or slide.

From these measurements we prepare a drawing and a written specification. Nothing is produced until you have reviewed and approved both documents, so the scope is clear from the start.

Safety and standards to keep in mind

Security gates must be safe for people and vehicles. Pinch points, gap sizes, climbing risks and the stability of the leaves all matter. For railings and guarding elements, the Israeli standard SI 1142 is the general reference, and exact dimensional requirements are confirmed with your engineer.

We design with these considerations in mind, but we recommend that your structural or safety engineer reviews the final specification where local requirements apply.

From approval to production and installation

Once the specification is approved, the components are cut and fabricated in our factory on Rival Street in Tel Aviv. Stainless steel parts are finished to the agreed standard, then delivered and installed at the site.

Installation includes fixing the posts or frame, hanging the leaves, adjusting the hardware and testing the movement. We walk through the operation with you before handover.

Comparing quotes fairly

When comparing offers, check that each one lists the same items: material grade, leaf dimensions, hardware, automation, finishing and installation. A lower total can hide missing parts or a different specification.

Confirm the grade and finish are written down
Check that installation and site preparation are included
Ask what is excluded so there are no surprises

Frequently asked questions

What information do I need to send for a quote?

Send photos of the opening, approximate width and height, the type of access needed and whether you want automation. Any existing drawings or design references are also helpful.

Do you measure on site before quoting?

Yes. We arrange an on-site measurement so the drawing and specification reflect the real opening, level and surroundings.

Are stainless steel gates suitable near the sea?

Stainless steel is chosen for its corrosion resistance, but the right grade and finish depend on the exposure. We will recommend the suitable option during the specification stage.

Will the specification include installation?

Installation is part of the process described in the specification. The exact items included are listed in writing so you can review them before approving.

Common mistakes to avoid

Requesting a quote with only a vague description or a single photo often leads to revisions later. Skipping the written specification and comparing totals without matching the included items is another common error.

Our recommendation

Measure the opening yourself before you call, note any slope or obstacles, and ask each supplier for the same written specification so offers can be compared on equal terms.

Summary

A good stainless steel security gate quote begins with clear information, an on-site measurement and an approved written specification. This keeps the scope transparent from inquiry to installation.

השאירו פרטים ונחזור אליכם