Request a Safe, Code-Compliant Window Bar Quote

t263-42

A code-compliant window bar quote starts with an accurate on-site measurement, a clear drawing, and a written specification that covers bar spacing, fixing method, and emergency release. Techno Kol Uzi builds window and balcony security bars to measure, so each quote is tailored to your opening and your safety needs.

Why a Proper Quote Matters for Window Bars

Window bars protect your home from intruders, but they also affect how people escape in an emergency. A bar that is too tight, badly fixed, or without a release option can become a hazard. That is why a quote should be based on the real opening, not a guess.

A careful quote also tells you what is included: materials, finish, fixing method, and installation. Comparing quotes on these points is far more useful than comparing headline numbers alone.

What to Prepare Before You Request a Quote

Having a few details ready speeds up the process and avoids misunderstandings. Please gather the following:

Clear photos of each window or balcony opening, taken straight on and from the side
Approximate width and height of each opening
The type of wall or frame (concrete, block, or existing metal frame)
Whether the bars are for a ground floor, upper floor, or balcony

Note any special needs, such as a window that must open for ventilation or a room used as an escape route.

The On-Site Measurement Step

Photos help us understand the site, but an on-site measurement is what makes the work accurate. We measure each opening, check the wall condition, and note where the bars can be safely anchored. We also look at how the window opens so the design does not block it.

Measurements taken on site reduce surprises during production and installation, and they give you a quote that reflects your actual openings.

Design, Spacing, and Safety Features

Good window bars balance security with safety. Spacing between bars, the profile used, and the fixing points all matter. For railings and guards, the Israeli standard SI 1142 is a useful general reference, but exact values should always be confirmed with your engineer or building committee.

Ask whether the design includes an emergency release or a hinged section that opens from inside. This is one of the most important questions to raise before you approve a drawing.

From Drawing to Approved Specification

After measurement, we prepare a drawing and a written specification. This document should list dimensions, materials, bar spacing, finish, and how the bars are fixed. Please read it carefully and confirm that it matches what you expect.

Your approval is the final step before production begins. Changes at this stage are simpler and cleaner than changes after fabrication.

Finishing, Production, and Installation

Bars are made in our factory and finished for long life. Depending on the specification, this may include hot-dip galvanizing or powder coating, which protect against weather and corrosion. Once finished, the bars are delivered and installed, with fixings chosen for your wall type.

If you have questions about the process at any stage, ask us before work starts so the result matches your approved drawing.

Frequently asked questions

Do I need a drawing before I can get a quote?

Not necessarily. Clear photos and measurements are enough to start. We prepare a drawing for your approval after the on-site measurement.

Can window bars include an emergency release?

Yes, many designs can include a release or hinged section operated from inside. Ask for this to be shown in your written specification.

Which standard should window bars follow?

The Israeli railing standard SI 1142 is a general reference. Exact dimensions and requirements should be confirmed with your engineer or building committee.

How do I compare two quotes fairly?

Check that both quotes list the same dimensions, materials, finish, spacing, fixing method, and installation. Matching details make the comparison meaningful.

Common mistakes to avoid

Requesting a quote from photos alone without measuring, or approving a drawing without checking spacing and emergency release, can lead to bars that do not fit or do not work safely. Take the time to confirm every detail before production begins.

Our recommendation

Before approving, ask for the written specification to show spacing, fixing points, and how the bars open in an emergency, and confirm these with your engineer if the window is used as an escape route.

Summary

A code-compliant window bar quote is built on accurate measurement, a clear specification, and a safe release option. Request yours with photos and dimensions so we can prepare a tailored proposal.

השאירו פרטים ונחזור אליכם