Requesting a Custom Window Grille Measurement in Tel Aviv

t258-37

To get a custom window grille quote, send clear photos of each window or balcony opening along with rough dimensions and your preferred style. Techno Kol Uzi then arranges an on-site measurement so the bars are made precisely to your opening, not to a standard size.

Why Custom Measurement Matters for Window Bars

Window bars protect your home, but they only work well when they fit the opening exactly. Standard sizes often leave gaps, uneven spacing or bars that do not line up with the frame. A custom grille is made from measurements taken at your actual window, so it sits flush, looks tidy and is secure from the first day.

Measuring also helps us suggest the right profile and spacing for your wall, whether the bars go inside the reveal or are mounted on the face of the frame.

What to Send With Your First Inquiry

A good first message saves time. Please include the following if you can:

Clear photos of each window or balcony opening, taken straight on and from a short distance
A rough width and height for each opening
The floor level and the side of the building if it is unusual
Your preferred material, iron or aluminum, and any finish colour you have in mind

Rough numbers are enough at this stage. Exact figures come from the measurement visit.

How the On-Site Measurement Works

After we review your photos, we arrange a visit to measure every opening. We check width and height at the top, middle and bottom, because older walls are rarely perfectly square. We also note the depth of the reveal, the type of frame and any obstacles such as shutters, air conditioner units or wiring.

Measuring on site means fewer surprises later. We can also talk through the design with you while we are there and look at the wall you intend to fix into.

From Drawing to Written Specification

Once measuring is complete, we prepare a drawing for each opening showing bar spacing, the pattern you chose and how the grille will be mounted. You then receive a written specification that lists the material, profile, finish and fixing method.

Please check the drawings carefully. If anything differs from what you pictured, tell us before approval. Changes are far easier at this stage than after production has started.

Approval, Production and Finishing

Nothing goes into production until you approve the drawing and specification in writing. After approval, the grilles are cut, welded and assembled in our Tel Aviv factory at Rival Street 37. Depending on the material and finish you choose, the pieces may be hot-dip galvanized or powder coated for long-lasting protection against weather.

We check each piece against the measurements before it leaves the workshop, so the installation day runs smoothly.

Installation and Practical Tips

Installation is the final step. We fix the grilles to your frame or wall using the method agreed in the specification, and we make sure they open or release as intended if you have a fire-escape requirement. Keep the area clear on the day, and let us know about any access restrictions in your building.

After installation, a quick check of fixings and finish once or twice a year keeps everything looking good.

Frequently asked questions

Do I need to be home for the measurement visit?

Yes, it helps to have someone there who can open the windows and point out any obstacles. We can agree a convenient time with you in advance.

Can I send measurements instead of arranging a visit?

You can send your rough figures to start the conversation, but we normally measure on site to confirm exact sizes before production.

Which material should I choose, iron or aluminum?

It depends on the look you want, the wall type and how much weight and security you need. We are happy to advise you when we see the openings in person.

Will the grilles match the style of my building?

Yes, we can work with a range of patterns and finishes. Send us a photo of your building and any design you like so we can suggest options.

Common mistakes to avoid

Sending only one measurement for a whole wall and skipping photos of the actual opening often leads to bars that do not fit. Measure at several points and include a clear photo of each window.

Our recommendation

Take photos before you request a quote and note any shutters, AC units or wiring near each opening, since these affect the design. Keep approval in writing so the final grille matches what you agreed.

Summary

A custom window grille quote starts with clear photos and rough sizes, followed by an on-site measurement, a drawing and a written specification before production. This process ensures bars fit your openings precisely.

השאירו פרטים ונחזור אליכם