Sample Visits: Requesting Profile Samples Before You Order

Why Ask for a Physical Profile Sample?

Photos rarely show the true depth of a steel-look finish, the thickness of a profile wall or how a corner joint is finished. Holding a piece in your hands lets you compare the colour and texture with your walls, floors and other metalwork in daylight, which is often different from the showroom or the screen.

A sample also helps you check details that matter day to day, such as how smoothly a handle sits, how the seal feels and how the frame looks from the side you will see most often.

What a Sample Visit Usually Covers

A sample visit is a practical look at the materials we use, not a full project review. Typically it includes:

• Cross-section pieces of the profile so you can see its shape and wall thickness
• Finish samples showing the steel-look colour and surface texture
• Corner and joint examples to see how the frame is put together
• Hardware and glazing options laid out for comparison

Bring your own photos of the building or room so we can discuss how the sample relates to your project.

How to Request a Sample

The simplest way to start is to send us a message with a few photos of the opening you want to fill, the approximate number of windows or doors and the style you have in mind. Tell us which finish you are leaning towards, if you have one.

We will confirm whether a sample is available for the profile you are considering and arrange a convenient time for you to visit our workshop at 37 Rival Street, Tel Aviv, or agree on how the sample will reach you.

What to Look For When You Inspect the Sample

Take your time with the sample and check it from several angles. Run your fingers along the surface and joints, look at the finish in both natural and artificial light, and hold it close to the materials it will sit next to.

• Is the colour consistent along the length of the profile?
• Do the corners look clean and well finished?
• Does the weight and rigidity feel right for the size of opening?

Write down your impressions so you can compare them with other options.

From Sample to Measured Order

Once you are happy with the sample, the next step is an on-site measurement. Each window and door is made to measure, so exact dimensions come from the opening itself rather than from a standard size. We then prepare a drawing and written specification for your approval before anything goes into production.

Keeping the approved sample on hand during this stage helps avoid misunderstandings about finish and profile.

Practical Tips Before Your Visit

Visiting with the people who will live with the windows or doors makes the decision easier. If possible, bring a small piece of the wall, floor or metal near the opening so you can check the colour match directly.

Also think about how you will use the opening. Some clients prioritise security, others prioritise light or insulation, and telling us early helps us focus the discussion on what matters most to you.

Frequently asked questions

Is a profile sample free to request?

Please ask us directly when you get in touch so we can confirm the arrangement for the profile you are considering.

Can I see the sample at the factory in Tel Aviv?

Yes, you can arrange a visit to our workshop at 37 Rival Street, Tel Aviv, to view samples and discuss your project in person.

Do I need exact measurements before asking for a sample?

No. Rough dimensions and photos are enough to start. Exact sizes are taken on site before production.

Will the sample match the finished windows exactly?

The sample shows the profile and finish we use, but small variations in light and surface can occur, so we recommend comparing it with the finished product in similar conditions.

Common mistakes to avoid

Choosing a finish from a screen or photo alone and skipping the sample is a common mistake that can lead to disappointment in colour or feel. Also avoid ordering before confirming how the sample relates to the actual opening and surroundings.

Our recommendation

Bring the sample to the location of the windows or doors and look at it in the same light you will have at home. Compare it side by side with the nearby materials before you approve the specification.

Summary

A physical profile sample lets you judge the steel-look finish, profile and build quality before you order. Request one early, inspect it carefully and move to measurement once you are confident.

Related guides

• Supplier Visit Checklist: What to Observe at a Factory Showroom
• Sealant and Insulation Foam Details to Confirm at Installation
• Reference Projects and Customer Feedback: How to Verify Them
• Accessories and Add-Ons Worth Asking About in Your Quote
• Communication and Response Time: Judging a Supplier Early
• Hidden Costs to Question in a Window Quote Without Prices
• All models in this category