Security Bars Order Checklist: Check These Before You Buy

Confirm Exact Measurements

Measurements are the foundation of a good order. Measure each opening at the width and height where the bars will sit, taking readings at the top, middle and bottom because walls are rarely perfectly square. Note the depth of the frame, the type of surface you will fix into, and any obstacles such as shutters, air-conditioning units or pipes.

• Width and height at three points
• Frame depth and projection
• Position of handles, hinges or openers

Our team can take these measurements on site, so you do not have to be exact on your own.

Choose the Right Material and Profile

Iron and aluminum both work well for security bars, but they suit different needs. Iron is strong and classic in appearance, while aluminum is lighter and does not need the same maintenance. Consider the profile thickness and the spacing between bars, since these affect both strength and how the bars look from the street.

Think about the style of your building as well. A bar design that suits a traditional facade may look out of place on a modern one, so review sample photos before deciding.

Select the Finish and Protection

The finish determines how the bars hold up against weather and time. Hot-dip galvanizing gives strong corrosion protection for iron, and powder coating adds color and an extra protective layer. Ask which finish is included in your order so there are no surprises at delivery.

Choose a color that matches your window frames or balcony railings. Confirm the exact shade with a sample before production begins.

Plan the Anchoring and Installation

Security bars are only as secure as their fixings. Check what the wall is made of, whether it is concrete, block or another material, and plan the anchor type and position accordingly. Bars should be fixed into solid structure, not only into plaster or thin cladding.

Ask whether installation is included in your quote and who will carry it out. Clarify the timing so the work can be scheduled around your plans.

Review the Drawing and Written Specification

Before you approve production, read the drawing and written specification carefully. It should show the bar layout, dimensions, material, profile, finish, fixing points and the direction of any opening element. If something on the drawing does not match what you discussed, raise it now, since changes after production are costly and slow.

Sign off only when you are satisfied that the drawing reflects your intended result.

Check Safety and Local Requirements

Security bars must protect against intruders while still allowing safe escape in an emergency. Discuss with us how the design allows for quick release from inside, particularly for bedrooms and upper floors. Where railings are involved, the Israeli railing standard SI 1142 applies, and the exact values are checked with your engineer rather than assumed.

If your building committee or an architect is involved, make sure they have seen and approved the design before work begins.

Frequently asked questions

Do I need to measure the openings myself before ordering?

You can take rough measurements, but we recommend an on-site measurement so the bars fit precisely. We check each opening at several points before drawing the design.

Which is better, iron or aluminum security bars?

Iron offers a strong, traditional look and suits many building styles, while aluminum is lighter and needs less maintenance. The best choice depends on your building, budget considerations aside, and how much upkeep you want.

Can security bars be designed to allow emergency escape?

Yes, designs can include a quick-release or opening section so occupants can leave in an emergency. Ask us to include this in the drawing for bedrooms and upper floors.

Will I see a drawing before production starts?

Yes, you receive a drawing and written specification for approval. Production begins only after you confirm the details.

Common mistakes to avoid

The most common mistake is ordering based on rough measurements or photos alone, which leads to bars that do not fit. Another is approving a drawing without checking the finish, anchoring method and opening direction.

Our recommendation

Measure at three points in each opening, decide on the finish and anchoring before approval, and make sure the drawing shows the emergency release option. Taking these steps before you order saves time and avoids costly changes.

Summary

A final checklist covering measurements, material, finish, anchoring, drawing approval and safety ensures your security bars fit well and perform as expected.

Related guides

• Installing Window Security Bars on Second-Floor Windows Without Drilling Into Brick
• Red Flags to Avoid When Ordering Security Bars
• Hinged vs Fixed Iron Security Bars: Which Works Better for Emergency Egress
• Signs of a Reliable Security Bar Manufacturer
• Quick-Release Balcony Security Grilles That Open From Inside Without a Key
• Payment Terms and Deposit Questions for Suppliers
• All models in this category