Sliding Aluminum Doors for Open-Plan Interiors

t409-17

Sliding aluminum interior doors let you divide an open-plan space when needed and hide the division when it isn't, without a swinging door taking up floor area. Techno Kol Uzi manufactures them to measure from aluminum profiles with glass or solid infill, to suit the layout and the way the space is used.

Why designers choose sliding doors for open plans

In an open-plan interior, a swinging door can cut across furniture, block a walkway or waste wall space. A sliding door runs along the wall or ceiling, so the leaf never enters the room. This makes it practical for kitchens that need to close off from living areas, home offices that need quiet, or bedrooms that share a open corridor.

Aluminum is a good choice for these doors because the profiles are slim, stable and easy to finish in the color the designer specifies. The result looks deliberate and light rather than heavy.

Planning the track and wall space

Before drawing the door, check how much wall remains beside the opening. A sliding leaf needs room to travel fully clear of the opening, and the track adds depth to the wall or ceiling. Confirm where the track will sit, whether it is surface-mounted or recessed, and whether the ceiling or lintel can carry the load.

Measure the opening and the free wall on both sides.
Decide on a single or double sliding leaf.
Mark the track height so it aligns with other doors and frames.

Choosing glass, solid or mixed infill

Glass infill keeps the open feeling and lets daylight pass between rooms, which suits designers who want continuity. Solid infill gives acoustic privacy and a calmer look. Many projects combine the two, with a glazed upper section and a solid lower panel, or with frosted or clear glass chosen for the level of visibility needed.

Ask the client how private the room must be when the door is closed. That answer decides the infill more than the style does.

Sightlines, sealing and daily use

A sliding door should close with a clean meeting line and a stable stop. Think about where the handle or pull sits, so it is easy to reach from both sides and does not catch clothing or furniture. Consider whether the door needs to stay open at a set position, and how it will behave when a child or pet pushes it.

For bathrooms or rooms with a different climate, discuss the seal and the floor detail early, since threshold height affects how the door moves.

Working with the factory: the process

The process starts with an inquiry and photos of the opening, followed by an on-site measurement at Techno Kol Uzi. We then prepare a drawing and a written specification covering profile type, infill, opening direction, track and finish. The client approves the drawing before production starts in our factory at 37 Rival Street, Tel Aviv.

After production, the doors are finished and installed on site. Sending the floor plan and the intended wall finish with your first inquiry helps us propose the right track solution quickly.

Finishes and coordination on site

Aluminum sliding doors can be coordinated with other metal elements in the project, such as window frames or glass partitions, so the whole interior reads as one system. Specify the finish early, because it affects how the door looks against the flooring, wall paint and hardware chosen by the designer.

Coordinate the installation timing with the drywall and flooring contractors. Walls and floors should be close to final before the track is fixed, to avoid adjustments later.

Frequently asked questions

Do sliding aluminum doors work well in narrow apartments?

Yes. Because the leaf slides along the wall, it does not need the clearance a swinging door requires, which makes it a good choice for tight layouts. The wall beside the opening must be long enough to hold the open leaf.

Can the door be made with glass and aluminum together?

Yes. Aluminum profiles can frame glass or solid infill, and the two can be combined in one leaf. The choice depends on how much light and privacy the room needs.

Do I need to decide the track before the door is designed?

Yes, the track position affects the drawing and the wall work. Confirm it during the on-site measurement so the specification matches what the builder will prepare.

How do I start a project with Techno Kol Uzi?

Send an inquiry with photos and the floor plan if you have one. We will arrange an on-site measurement, then prepare a drawing and specification for your approval before production.

Common mistakes to avoid

Designers often plan the door without checking how much free wall remains for the open leaf or where the track will sit. Late decisions about infill and track height can force redesign after production has started.

Our recommendation

Measure the free wall on both sides of the opening and fix the track position before drawing the door. Agree the infill and finish with the client early, so the specification can go to approval without changes.

Summary

Sliding aluminum interior doors save floor space and suit open layouts when planned around wall length, track position and infill. Techno Kol Uzi makes them to measure from our Tel Aviv factory.

השאירו פרטים ונחזור אליכם