Stainless Steel Elevator Panels for Lobby Interiors

t496-13

Stainless steel elevator panels are custom-fabricated wall and ceiling cladding for the cab interior, chosen for durability, easy cleaning and a refined lobby look. Techno Kol Uzi manufactures them to measure in our Tel Aviv factory, working from the architect's drawings and on-site verification. Finish, gauge and fixing method are agreed at the design stage so the cab matches the building's identity.

Why architects specify stainless steel for elevator cabs

An elevator cab is one of the most touched and most seen surfaces in a building. Stainless steel handles daily contact, cleaning agents and humidity well, and it keeps a crisp appearance for years when it is correctly specified and finished.

For lobbies and office towers it also offers a material language that suits modern architecture: clean planes, precise joints and a range of finishes from brushed to mirror-polished. Designers can use it to echo other stainless or metal elements in the lobby.

Finishes and surface options

Stainless steel panels are usually supplied in a brushed (hairline) finish, which hides fingerprints and scratches better than a mirror surface. Mirror, bead-blasted and patterned finishes are also possible for accent walls or feature cabs.

Hairline brushed: everyday wear, most common choice
Mirror polished: maximum reflection, shows marks more
Bead-blasted: matte, uniform, low glare

Discuss the finish on a physical sample under the actual lobby lighting before approving it.

Panel construction and fixing

Panels are cut, bent and formed from sheet to the dimensions of the cab wall, with returns and edges prepared so they sit cleanly against the substrate. The gauge is chosen to balance stiffness, weight and the sound a panel makes when touched.

Fixing is typically concealed, using clips, screws behind lips or adhesive on a suitable backing. Protective film is applied during transport and installation and removed only at handover to protect the finish.

Coordinating with the elevator supplier

Cab interiors must fit the elevator manufacturer's structure, door openings, operating panels and safety requirements. Early coordination prevents clashes with handrails, mirrors, lighting and ventilation openings.

We recommend obtaining the lift company's cab dimensions and fixing points before drawing the panels, and confirming that any ventilation or emergency features are reflected on the shop drawing.

Measurement and drawing process

Our workflow starts with the architect's design and the elevator supplier's dimensions. We verify the real cab on site, then prepare drawings and a written specification covering material, gauge, finish, joints and fixing. Nothing goes into production until the design team approves it.

Because the cab is produced to measure, site checks at the right stage save rework and keep the installation schedule on track.

Maintenance and care for stainless steel cabs

Stainless steel is low-maintenance, but it still benefits from proper care. Clean with a soft cloth and mild, non-abrasive cleaner, wiping along the direction of the grain on brushed finishes.

Avoid steel wool and abrasive pads
Avoid harsh chlorine-based cleaners
Wipe off salts and moisture promptly

Including care instructions in the building handover documents helps the facilities team protect the investment.

Frequently asked questions

What finish is best for a lobby elevator cab?

Brushed hairline stainless is the most practical choice because it hides fingerprints and light scratches. Mirror finishes suit feature cabs but show marks more readily.

Can stainless steel panels be made to a custom size?

Yes. Panels are manufactured to measure from the architect's drawings and verified against the real cab on site before production.

Do I need to coordinate with the elevator company?

Yes. Cab dimensions, door openings, operating panels and ventilation must be confirmed with the elevator supplier so the panels fit correctly.

How should stainless steel cab panels be cleaned?

Use a soft cloth and a mild non-abrasive cleaner, wiping along the grain on brushed surfaces. Avoid steel wool and chlorine-based products.

Common mistakes to avoid

Specifying a mirror finish without checking how it looks under lobby lighting, and drawing panels before confirming the elevator supplier's cab dimensions. Both lead to rework that is easy to avoid with early coordination.

Our recommendation

Approve a physical finish sample under the real lobby lighting and get the lift company's dimensions and fixing points in writing before the shop drawings are signed off.

Summary

Stainless steel elevator panels give lobby cabs a durable, clean and refined finish when finish, gauge and fixing are planned early and coordinated with the lift supplier.

השאירו פרטים ונחזור אליכם