Stainless Steel Kitchen Splashbacks and Shelving at Home

Why choose stainless steel behind the cooking area

The wall behind a hob takes more abuse than almost any other surface in the home. Splashed oil, steam and daily wiping wear down paint and tile grout over time. Stainless steel is non-porous, easy to clean and resistant to heat, so it suits this zone well.

Beyond practicality, a steel splashback reflects light and visually extends the kitchen. It pairs naturally with modern cabinetry, glass and wood finishes, and it can be produced with brushed or polished surfaces depending on the look you want.

Measuring and planning your splashback

A good splashback starts with accurate measurement. Walls in older Israeli apartments are rarely perfectly straight or square, so the panel should be measured on site rather than taken from drawings alone. The survey should record the height above the counter, the width at several points, the position of sockets, the hob and the sink.

• Note the distance from the counter to the upper cabinets.
• Mark sockets, switches and any pipes that need access.
• Check whether the wall is flush or has tiles that must be removed.

Stainless steel shelving for the kitchen wall

Open shelving in brushed stainless steel is a practical companion to a splashback. It keeps frequently used spices, oils and utensils within reach and creates a tidy, professional look. Shelves can be sized to your wall and fixed with concealed brackets for a clean finish.

Plan the load before choosing the thickness of the shelf and the spacing of the supports. Heavy jars and cookware need stronger supports than decorative items, so describe how you intend to use the shelves when you request a quote.

Materials and finishing options

Stainless steel for kitchens is typically selected for its corrosion resistance and surface finish. Brushed finishes hide fingerprints and water marks better than mirror polish, which shows every smudge but gives a highly reflective effect. Edges can be folded, rounded or finished flush depending on the design.

If the splashback is installed beside other metalwork in the home, consistency of finish matters. Ask to see sample finishes before production so the colour and texture match your cabinetry and appliances.

How the order process works

The process begins with an inquiry where you share photos and a rough description of the kitchen. We then arrange an on-site measurement and prepare a drawing and written specification for your approval. Nothing is produced until you confirm the design, so you can review dimensions, finish and fixing method first.

• Inquiry with photos
• On-site measurement
• Drawing and specification for approval
• Production in our Tel Aviv workshop
• Installation at your home

Installation and everyday care

Installation involves securing the panel to the wall with appropriate fixings, sealing edges where needed and checking alignment with the counter and cabinets. Once fitted, a stainless steel splashback needs only warm water and a soft cloth. For brushed finishes, wipe along the grain to keep the surface even.

Avoid abrasive pads and harsh chlorine-based cleaners, which can dull the surface. A quick wipe after cooking is usually enough to keep the panel looking new for years.

Frequently asked questions

Can a stainless steel splashback be cut to an uneven wall?

Yes. Because the panel is made to measure, it can be shaped to follow the measured dimensions of your wall, including minor irregularities. An on-site survey is what makes this accurate.

Is brushed or polished stainless steel better for a kitchen?

Brushed steel is generally more forgiving because it hides fingerprints and water marks. Polished steel gives a sharper, reflective look but needs more frequent wiping.

Do I need a permit to install a steel splashback?

A splashback is normally a simple interior fitting, but if you are also altering walls or structures, check requirements with your architect or building committee before work begins.

Can stainless steel shelves hold heavy items?

They can, provided the shelf thickness, length and bracket spacing suit the load. Tell us what you plan to store so the specification can be designed accordingly.

Common mistakes to avoid

Ordering a splashback from plans without measuring the actual wall, and choosing a mirror finish without considering how often it will show marks. Both are easily avoided with an on-site survey and a sample check.

Our recommendation

Measure the wall after old tiles or plaster have been removed, not before, and ask for a finish sample next to your cabinet colour. Consider brushed steel for busy family kitchens.

Summary

A made-to-measure stainless steel splashback and shelving set gives a durable, easy-to-clean kitchen wall. Accurate measurement and an approved specification are the keys to a good result.

Related guides

• Shared Building Waste and Bicycle Storage Enclosures in Metal
• Interior Steel Feature Walls and Panels for Private Homes
• Lift Shaft Doors and Surrounds for Residential Buildings
• Garden Fencing Systems for Detached Houses
• Shared Rooftop Pergolas and Railings for Residential Blocks
• Exterior Metal Staircases for Private Houses
• All models in this category