Stainless Steel Office Gates for Lobbies and Modern Entries

t270-25

A stainless steel office gate suits lobbies and modern entries because it combines a clean, contemporary look with durability and low maintenance. Each gate is designed to the exact opening, with the frame, infill and mechanism matched to the expected traffic and the building's architecture.

Why stainless steel suits office lobbies

Office lobbies are seen by visitors, staff and clients every day, so the entry gate sets the tone for the whole building. Stainless steel offers a refined, neutral look that pairs well with stone, glass, timber and concrete finishes, and it does not compete with the interior design.

The material also handles heavy daily use well. It resists corrosion in the coastal conditions common across Israel, and it keeps a consistent appearance over years when it is cleaned regularly with a mild, non-abrasive cleaner.

Choosing the right design for the entry

Start by deciding what the gate needs to do. A decorative swing gate for a reception area differs from a security gate that controls access after hours. The design should follow the way people move through the space and the width the entry needs.

Single or double leaf, depending on the opening width
Solid panels, open bars or a combination with glass
Hinged, sliding or automated operation

Measurement and drawing before production

Every gate is made to measure. Our team visits the site, records the opening, the floor level, the wall construction and any slope or threshold. These details decide how the gate hangs and how it clears the floor finish.

Before production you receive a drawing and a written specification covering dimensions, profile sizes, infill pattern, hardware and finish. You approve these before we start cutting and welding, so changes are made on paper rather than in the workshop.

Finishing and surface care

The finish affects both the look and the upkeep. Brushed stainless steel hides fingerprints and light scratches well, which suits high-traffic lobbies. Polished finishes give a brighter, more reflective appearance but show marks more easily.

Ask the designer to confirm the finish against the other materials in the lobby, such as metal handrails, door hardware and wall panels, so that all the metalwork reads as one consistent family.

Safety, access and compliance

Office entries must balance appearance with safety. Gates should open smoothly, close reliably and be easy to pass through during normal hours. Where a gate is part of an emergency route, its opening and locking method must allow safe exit.

For railings and guarding alongside the gate, we follow the general requirements of the Israeli railing standard SI 1142. Exact dimensions and load values are checked with your structural or safety engineer for each project.

Installation and coordination with the building team

Installation works best when the gate is coordinated with the floor, wall and electrical work. Fixing points, cable routes for automation or access control, and the final floor finish should be agreed early, so the gate is fitted to a finished opening rather than adjusted on site.

Share your architect's or interior designer's plans with us at the inquiry stage. We can then align the gate's frame and fixings with the building's details from the start.

Frequently asked questions

Can a stainless steel office gate be made to a non-standard width?

Yes. Every gate is made to measure from the site survey, so the width, height and leaf layout follow your actual opening.

Does stainless steel need special maintenance?

Routine cleaning with a mild, non-abrasive cleaner and a soft cloth is usually enough. Avoid steel wool and harsh chemicals, which can damage the surface.

Can the gate be combined with glass or automated access?

Yes. Solid, open or glass infill can be combined in one gate, and electric operation or access control can be planned during the design stage.

How do I start a project with your team?

Send photos of the entry and a short description of the use. We then arrange an on-site measurement and prepare a drawing and written specification for your approval.

Common mistakes to avoid

Choosing a finish or design without checking it against the rest of the lobby metalwork, and fixing the gate before the floor and wall finishes are complete, often leads to misalignment and costly adjustments.

Our recommendation

Bring the architect's or designer's plans and a photo of the entry to the first site visit, and confirm the floor finish and automation cable routes before approving the drawing.

Summary

Stainless steel office gates give lobbies and modern entries a clean, durable finish, with every gate built to measure from an approved drawing.

השאירו פרטים ונחזור אליכם