Stainless Steel Solar Mounting Brackets for Rooftop Heaters

t465-21

Stainless steel solar mounting brackets are the metal supports that hold a solar water heater or panel firmly to a rooftop, resisting rain, sun and salty coastal air. For most Israeli homes, custom-made stainless steel brackets fitted to the actual roof and tank dimensions give a safer, longer-lasting installation than generic off-the-shelf parts.

Why stainless steel suits rooftop solar mounts

A rooftop solar installation lives outdoors all year. It faces strong sun, rain, wind and, in many parts of Israel, salty air that speeds up corrosion in ordinary steel. Stainless steel resists rust far better, so brackets keep their strength and their appearance for years rather than months.

Stainless steel also works well with the other metals used in a solar system, which reduces the risk of corrosion where two different metals meet. For a family that wants a mount they will not need to replace or repaint, it is a practical choice.

Types of rooftop mounts we make

Every roof is different, so the mount has to suit the specific setup. Common types we manufacture include:

Angled brackets for flat roofs, set to the correct tilt for the collectors
Base frames for water heater tanks that sit on the roof
Wall and parapet mounts for panels fixed to a vertical surface
Rails and clamps that carry the collector frame

Each one is cut, bent and finished in our factory to the dimensions agreed with you before production starts.

How we measure and design your mount

Our process starts with an inquiry where you send photos of the roof and the existing or planned equipment. We then visit the site to measure the roof surface, the tank or panel size, the fixing points and any obstacles such as parapets or roof access hatches.

From these measurements we prepare a drawing and a written specification. You review and approve it before any metal is cut. This step prevents mismatches that would otherwise only appear on installation day.

Materials, finishing and load considerations

We select the stainless steel grade and the thickness according to the size of the collectors, the water volume in the tank and the wind exposure of your roof. Heavier loads and exposed rooftops need more robust sections and careful fixing points.

Where the structure is a mixed-material build, we can advise on protective separation between metals. Exact load and fixing values should always be confirmed with your structural or solar engineer before installation.

Installation and what to check afterwards

Once the brackets are approved and produced, they are delivered and fitted to the roof. The installer should check that the mount is level, that all fixings are tight and that the collector or tank sits square on the frame.

Confirm the tilt angle matches the design
Check that fixings go into solid structure, not only the roof covering
Inspect the seals where the mount passes through the waterproofing

A short check after the first heavy rain or windy day helps catch any movement early.

Working with us on your solar project

We work directly with homeowners, building committees, contractors, architects and installers. If you already have a solar supplier, we can supply the brackets to their drawings. If you do not yet have a system, we can help you define the mounting requirements before you choose equipment.

Our workshop at 37 Rival Street in Tel Aviv has been producing custom steelwork since 1945, and the work is still managed by the third generation of the family, with every mount built to measure.

Frequently asked questions

Are stainless steel solar brackets better than galvanized steel?

Stainless steel generally resists corrosion better, especially in coastal or humid conditions. Galvanized steel can be a lower-cost option for some roofs, and the right choice depends on your location and the load involved.

Do you measure the roof before making the brackets?

Yes. We visit the site to measure the roof, the tank or panels and the fixing points, then prepare a drawing for your approval before production.

Can you make brackets for an existing solar system?

Yes. If your installer or engineer provides the dimensions and fixing details, we can produce replacement or additional brackets to match.

How do I know the brackets are strong enough for my roof?

Load and fixing requirements should be confirmed with your structural or solar engineer. We will build to the agreed specification and can advise on suitable materials.

Common mistakes to avoid

Choosing generic brackets without measuring the actual tank or collectors often leads to poor alignment and stress on the roof. Fixing into the roof covering instead of the structure is another common error that can cause leaks and loose mounts.

Our recommendation

Send photos and rough measurements early, and insist on a written drawing approved by your installer or engineer before production. Specify stainless steel where the roof is exposed to salty or humid air, and check all fixings after the first storm.

Summary

Custom stainless steel solar mounting brackets, measured and built for your roof, give a durable and safe base for rooftop solar water heaters and panels.

השאירו פרטים ונחזור אליכם