Staircase Building Code Requirements for Steel Stairs in Israel

Why Staircase Requirements Matter Before You Order

Staircase requirements affect the whole project, not only the finished look. Dimensions of treads, risers, landings and headroom are set by regulation, and a stair that does not comply can delay the building permit or the occupancy inspection.

Steel stairs are often chosen for their strength and slim profile, but they still have to meet the same rules as concrete or wooden stairs. Raising the issue early saves redesign and rework later.

What Information We Need From You

To prepare a compliant design we ask for a few key items at the start:

• Floor plans and sections showing the stair location and floor heights
• The building type (private house, residential building, commercial or public use)
• Required escape routes and any fire safety notes from the architect
• Photos of the space and any existing openings

With this information we can propose a layout that fits the code and the available space.

On-Site Measurement and Drawings

Our team visits the site to measure the floor-to-floor height, the opening size and the surrounding structure. Measurements are taken carefully because small errors can change the number of steps and the landing positions.

After measuring, we prepare a drawing and a written specification. The drawing shows the stringers, treads, landings, handrail heights and fixing points. You receive it for review and approval before any steel is cut.

Handrails, Guards and Safety Elements

Handrails and guards are among the most checked parts of a staircase. The Israeli railing standard SI 1142 covers the general requirements for railings, and the engineer confirms the exact heights, infill spacing and loads for your project.

• Continuous handrail on the required sides
• Guard infill that prevents a sphere from passing through
• Non-slip tread surfaces where needed

Production in Our Factory

Once the drawing is approved, the stair is manufactured in our factory on Rival Street in Tel Aviv. Steel members are cut, welded and assembled to the measured dimensions, then checked against the approved drawing.

Finishing follows production. Hot-dip galvanizing and powder coating protect the steel against corrosion, which is important for outdoor and humid locations. We confirm the finish with you before the stair leaves the workshop.

Installation and Final Checks

On site, the stair is fixed to the floor slabs, walls or existing structure according to the approved details. Our installers check level, alignment and fixing strength as they work.

Once installed, we review the stair against the drawing and the requirements noted by your architect. Any inspection requests or documentation needed for the permit can be prepared together with your design team.

Frequently asked questions

Do steel staircases have to follow the same rules as other staircases?

Yes. Steel stairs must meet the same building regulations for dimensions, headroom, handrails and guards as stairs made from other materials. The material changes the structure, not the code requirements.

Who confirms the exact staircase dimensions for my project?

The architect or structural engineer confirms the exact dimensions, loads and fixing details for each project. We build according to the approved drawings and specifications.

Can you help with the documents needed for a permit?

We can provide drawings, specifications and product details to support your permit application. Your architect or engineer remains responsible for the submission and code compliance.

Do you install the staircase as well as manufacture it?

Yes. Our team manufactures the staircase in our Tel Aviv factory and installs it on site, following the approved drawing and fixing details.

Common mistakes to avoid

The most common mistake is measuring too early or without checking the final floor finishes, which changes the step heights. Ordering before the architect has confirmed the requirements can also lead to costly changes.

Our recommendation

Share the stair location, floor heights and building type with your architect before measuring, and ask for the handrail and guard requirements in writing. This keeps the design, the drawing and the permit documents consistent from the start.

Summary

Staircase building code requirements for steel stairs in Israel cover dimensions, handrails, guards and safety, and must be confirmed by your design team. Early measurement and a reviewed drawing make the process smooth from production to installation.

Related guides

• Fire Safety Considerations in Steel Staircase Planning
• Handrail and Balustrade Planning for Steel Stairs
• Cutting Steel Stringers: The Fabrication Process
• Structural Steel Stringers: How They Are Engineered
• How Steel Staircase Components Are Welded
• Steel Staircase Material Selection: Grades and Finishes
• All models in this category