Steel Support Structures for Rooftop Solar Panel Installations

t482-14

A steel structure solar panel mounting system is a custom-built frame that carries solar panels on a roof or terrace at the right angle and height. Steel frames are built to the exact dimensions of your roof and load conditions, and they can be galvanized or coated to resist weather. Each project starts with an on-site measurement and a written specification approved by the client before production.

Why use a custom steel frame for solar panels

Every roof is different. Some are flat concrete, some have uneven slabs, and some have limited space around water tanks, skylights or antennas. A custom steel frame lets the mounting structure follow the actual shape of your roof instead of forcing the roof to fit a standard kit.

Steel is strong for its weight, which matters on residential buildings where the load on the structure must be kept under control. A well-designed frame spreads the weight of the panels evenly across the roof supports.

What we check before building

Before any steel is cut, we need to know the basics. These usually include:

Roof type and the condition of the surface
Available area and the position of obstacles
Panel size, number and planned orientation
Wind exposure at the building location
Access route for lifting the frame onto the roof

Structural calculations and load values are confirmed with a qualified engineer for each project.

How the frame is designed and made

After measurement we prepare a drawing and a written specification showing the frame layout, profile sizes, connection points and fixing method. You review and approve it before production starts.

The frame is then cut, welded and assembled in our factory on Rival Street in Tel Aviv. Working in the workshop means accurate fit, and pieces are checked before they travel to the site.

Corrosion protection for rooftops

A roof is exposed to sun, rain, salt air and temperature changes, so the finish matters as much as the strength. Steel mounting structures are typically hot-dip galvanized or powder coated, depending on the design and the environment.

Galvanizing protects the steel with a zinc layer, while powder coating adds color and an extra barrier. Choosing the right finish with your installer helps the frame last alongside the panels.

Installation on site

Once the frame is delivered, it is fixed to the roof structure at the planned anchor points. Fixing details depend on whether the roof is concrete, tiled or has a waterproofing layer, so we agree on the method in advance.

Panels are then mounted on the frame by your solar installer. Good coordination between the steel supplier and the solar company avoids mismatched holes and wasted time on the roof.

Planning tips for property owners

Start planning early, before ordering panels. Confirm with your building committee if the roof is shared, and check any rules that apply to your building.

Measure the roof area and note all obstacles
Decide on panel count and orientation first
Ask for a written drawing before approving work
Plan access for lifting materials onto the roof

Frequently asked questions

Can a steel frame be made for any roof shape?

Yes, custom frames are designed for the specific roof, including uneven surfaces and areas around tanks or skylights. The layout is confirmed with measurements and a drawing before production.

Which finish is better for a rooftop frame?

Hot-dip galvanizing and powder coating are the most common choices for outdoor steel. The right option depends on the design and exposure, and we recommend it together with your installer.

Do I need an engineer to approve the structure?

Yes, load and structural details should be confirmed by a qualified engineer for each project. We can work with your engineer and provide the drawings they need.

How do I start a project with you?

Send us photos of the roof and the planned panel area, and we will arrange an on-site measurement. From there we prepare a drawing and specification for your approval.

Common mistakes to avoid

Ordering panels before measuring the roof and confirming the frame layout often leads to changes and delays. Skipping the drawing approval or choosing a finish without considering the weather exposure can also cause problems later.

Our recommendation

Measure the roof and agree on the frame drawing before buying panels, and have your engineer confirm the structural details early. Ask for the galvanizing or coating method in writing so you know exactly what protects the steel.

Summary

A custom steel frame gives rooftop solar panels a stable, weather-resistant base fitted to your actual roof. Plan the measurements, drawing and finish early for the smoothest installation.

השאירו פרטים ונחזור אליכם