Temporary Steel Construction Stairs for Safe Site Access

t384-18

Temporary steel construction stairs give workers and supervisors safe, stable access between floors while the permanent staircase is not yet built. They are fabricated to measure from steel, with fixed landings and handrails, so they can be installed quickly and removed when the final stair is ready.

When Temporary Steel Stairs Are Needed on Site

During a build, the permanent staircase is often one of the last elements completed. Until then, crews still need safe routes to upper floors for materials, inspections and daily work. Temporary steel stairs fill this gap and keep access controlled as the structure rises.

Multi-storey construction where the final stair is installed late
Renovations that keep a building partly occupied
Roof, mezzanine or service-level access during fit-out

Key Design Points for Site Stairs

A site stair must be sturdy, level and predictable. Stringers, treads and landings should be sized for repeated loading from people and materials. Consistent step height and tread depth matter most, because uneven steps are a common cause of falls on site.

Landings at intervals and a clear, unobstructed width help people pass safely, especially when carrying tools or panels.

Handrails, Guards and Edge Protection

Handrails on both sides are strongly recommended, and open edges should be guarded wherever a fall could occur. Our railings are fabricated in steel and can be adapted to the temporary layout so they are secure without blocking the route.

Israeli railing requirements are set out in the standard SI 1142. Exact dimensions should always be confirmed with your structural or safety engineer before installation.

Fixing and Stability on the Building

Temporary stairs must be anchored properly to the structure or to a stable base. Check that the floor or slab can take the load and that fixings are correct for the substrate. A stair that moves or rocks will quickly lose the trust of the crew using it.

Confirm the support points before the stair arrives
Use level bearing surfaces and secure fixings
Recheck connections after the first weeks of use

Finishing and Durability for Site Conditions

Steel suits the rough demands of a building site, but finish matters. Hot-dip galvanizing gives strong corrosion protection for outdoor use, and powder coating adds a durable surface finish where appearance or extra protection is wanted.

Choosing the right finish helps the stair stay safe and usable through rain, dust and months of heavy traffic.

From Inquiry to Installation

The process starts with an inquiry and photos of the site. We then measure on site, prepare a drawing and a written specification, and wait for your approval. Production takes place in our factory at 37 Rival Street, Tel Aviv, followed by finishing and installation.

Clear measurements at the start prevent delays and ensure the stair fits the opening and floor levels correctly.

Frequently asked questions

How long can temporary steel stairs stay in place?

They can remain for as long as the build phase requires, as long as they are inspected regularly. Plan removal once the permanent staircase is safely usable.

Can temporary stairs be moved to another floor or site?

Steel stairs can often be dismantled and reused, depending on their design and fixings. Discuss reuse at the planning stage so the structure is built with this in mind.

Do you measure on site before making the stairs?

Yes. On-site measurement is a standard step so the stair fits the floor levels and opening accurately. A drawing and written specification are sent for your approval before production.

Which finish is best for outdoor site stairs?

Hot-dip galvanizing is widely used for outdoor steel because it resists corrosion well. Powder coating can be added where a specific finish is preferred.

Common mistakes to avoid

Choosing a stair without checking whether the floor or slab can carry the load is a frequent error. Leaving out handrails or edge guards to save time puts crews at unnecessary risk.

Our recommendation

Measure the opening and floor levels carefully before ordering, and have the stair anchored to a verified stable base. Ask your engineer to confirm handrail and guard details against SI 1142 before the stair goes into use.

Summary

Temporary steel construction stairs keep site access safe until the permanent staircase is ready. Good design, secure fixing, proper guarding and a durable finish make the difference.

השאירו פרטים ונחזור אליכם