Vitrine Cabinet Glass Door Replacement Made to Measure

t433-22

You can usually replace just the glass door of an existing vitrine cabinet instead of the whole unit. The new door is made to the exact measurements of your current opening, with a frame and hardware matched to what you already have.

When Replacing the Glass Door Makes Sense

Many vitrine cabinets are still structurally sound even when the door is cracked, scratched, warped or no longer closes properly. The cabinet body, shelves and lighting may be in good condition, and replacing only the door is often a practical choice.

Consider a replacement door when the glass is chipped or cracked, the frame has bent or loosened, the hinges or locks have worn out, or the door no longer sits square in its opening. If the carcass itself is rotting or the design no longer suits the room, a new cabinet may be the better option.

How We Measure an Existing Vitrine Door

Accurate measurement is the key to a door that fits. We measure the opening at several points, because older cabinets are rarely perfectly square. We also check the thickness of the existing glass, the type of hinges and how the door closes.

Width and height of the opening at top, middle and bottom
Depth and thickness of the cabinet walls
Hinge positions, lock type and handle style
Photos of the cabinet from the front and side

Choosing the Glass and Frame

The glass choice affects both looks and safety. Clear, tinted or frosted glass each give a different effect, and the thickness should suit the door size and its weight. For doors that are opened often, a sturdier frame and reinforced hinges help the door last.

We can match the frame finish to your existing furniture or room, whether you prefer a slim aluminum profile or a more traditional look. Tell us where the cabinet stands so we can recommend a suitable build.

Our Production and Finishing Process

Every door is manufactured in our factory at Rival Street 37, Tel Aviv, which has worked with metal and glass since 1945. We cut the frame to your drawing, prepare the glass to size and assemble the door so it closes smoothly and evenly.

Where needed, the metal parts receive a protective finish such as hot-dip galvanizing or powder coating. You receive a written specification and drawing to approve before production starts, so there are no surprises when the door arrives.

Installation and Fit Check

Installation is done on site. We check that the door hangs level, closes without rubbing and seals neatly against the cabinet. Small adjustments to the hinges are made during the visit so the door operates smoothly.

Before we leave, we test the lock and handle and make sure the glass is clean and undamaged. If the cabinet body needs minor repair, we will tell you what is involved before any work begins.

Caring for Your New Glass Door

A new glass door lasts longer with simple care. Clean the glass with a soft cloth and a mild, non-abrasive cleaner, and avoid harsh chemicals on the frame finish.

Avoid slamming the door, which stresses the hinges
Check the handle and screws every few months
Keep heavy objects away from the glass edges

Frequently asked questions

Can you replace just the glass door without changing the whole cabinet?

Yes, in most cases we can make a new door to fit your existing cabinet opening. We confirm this during the on-site measurement, since the cabinet body must be in reasonable condition.

Do I need to bring the old door to the factory?

Not necessarily. We can measure the opening on site and work from photos and measurements, although a broken door can be useful to see how it was hung.

Can the new door match the style of my old one?

We can closely match the profile, frame finish and hardware to your current door. If you want a different look, we can suggest options during the drawing stage.

What information should I send first?

Send clear photos of the cabinet from the front and side, along with rough measurements of the opening. This helps us understand the job before we arrange a visit.

Common mistakes to avoid

Measuring only the outer size of the cabinet instead of the actual opening is a common error that leads to a door that does not fit. Ignoring a sagging or out-of-square cabinet can also cause a new door to rub or close poorly.

Our recommendation

Measure the opening at three heights and three widths, and keep the figures for your records before contacting a manufacturer. Ask for a drawing to approve before production so you can check the fit and finish.

Summary

Replacing a worn vitrine glass door is often simpler and more economical than replacing the whole cabinet. Accurate measurement and a clear drawing are the keys to a good fit.

השאירו פרטים ונחזור אליכם