Wrought Iron Stair Railing Fabrication for Traditional Homes

t335-5

A wrought iron stair railing for a traditional home is a custom-fabricated balustrade of hand-shaped iron bars, scrolls and a solid top rail, built to match the home's architecture. At Techno Kol Uzi, every railing is measured on site, drawn to specification, shaped and welded in our Tel Aviv factory, then galvanized and powder coated before installation.

What Makes Wrought Iron Right for Classic Homes

Wrought iron has a warmth and detail that suits traditional architecture, from stone-clad villas to classic apartment stairwells. Its slender bars and decorative scrolls can echo the lines of old doors, windows and balconies in the same building.

Because iron is strong, a railing can keep its profile thin while still meeting safety needs. That balance of strength and delicacy is what gives a classic staircase its character.

Designing the Railing with Your Architecture

A good railing starts with the house, not a catalog. We look at the stair geometry, the wall finish, the handrail material and the pattern of nearby ironwork so the new railing feels like part of the original design.

Choose a motif such as scrolls, spirals or vertical pickets
Match the bar spacing and height to the room's proportions
Decide on a handrail in iron, wood or stainless steel

We provide a written specification and drawing so you can approve every detail before production begins.

Measurement and Drawing Process

Accurate measurement is the foundation of a railing that fits well. Our team visits your home, records the stair rise, run, landing dimensions and wall conditions, and checks for any irregularities in the steps.

From these measurements we prepare a drawing showing the layout, bar pattern and fixing points. Your approval on the drawing is required before any material is cut.

Fabrication in Our Tel Aviv Factory

Our workshop at 37 Rival Street has been producing iron and steel work since 1945, and today the third generation of the family leads it. Bars are cut, heated and shaped by hand where a scroll or curve is needed, then assembled and welded to the drawing.

Consistent craftsmanship at each joint and bend gives the finished railing its clean, traditional appearance and a solid feel when you hold it.

Finishing for Long-Lasting Protection

Iron needs protection from humidity, salt air and daily wear. After fabrication, railings are hot-dip galvanized to protect the metal from within, then finished with powder coating in the color you choose.

Your color choice can be a deep black, a bronze tone or another shade that suits the facade and door hardware. We will confirm the finish with you before work is completed.

Installation and Safety Checks

Installation is carried out by our team, with the railing fixed to the stair structure at the correct points and height. We check that the railing is firm and that spacing between bars meets the requirements of the Israeli railing standard SI 1142.

Exact dimensional values are confirmed with the engineer for your specific stair, so the final installation is both safe and true to the design.

Frequently asked questions

How long does a custom wrought iron railing take to make?

Timing depends on the design complexity and the current production schedule. We confirm the timeline with you after the drawing is approved.

Can the railing match existing iron balconies or gates in my home?

Yes. We can match the bar profile, scroll pattern and finish so the stair railing blends with other ironwork in the house.

Do you handle the measurement and installation as well?

Yes. We measure on site, prepare the drawing and specification, and install the railing once it is finished and approved.

Is a wrought iron railing suitable for a home near the sea?

Yes, provided it is properly protected. Hot-dip galvanizing followed by powder coating helps the iron resist salt air and humidity.

Common mistakes to avoid

Choosing a railing from a catalog without measuring the actual stair often leads to poor fit and awkward spacing. Skipping the finishing step leaves bare iron exposed to moisture, which shortens the railing's life.

Our recommendation

Ask for a drawing and written specification before approving the job, and confirm the bar spacing, height and fixing method with your engineer. Choose the handrail and color together so the whole staircase looks intentional.

Summary

A wrought iron stair railing gives a traditional home lasting character when it is measured, drawn and fabricated to suit the architecture. Careful finishing and correct installation keep it safe and attractive for years.

השאירו פרטים ונחזור אליכם