Can You Get a Custom-Sized Electric Gate for Your Entrance?

Why standard gates often do not fit

Many entrances are not built to a standard size. Older buildings, sloped driveways, narrow lanes and openings shaped by existing walls all vary from one property to the next. A ready-made gate forced into an odd opening often leaves gaps, awkward posts or a poor appearance.

A custom gate is designed around your actual opening, so the posts, the gap at the ground and the clearance for the motor and tracks all work together. This matters most when the space is tight or when the gate has to match nearby railings and fences.

Sliding or swing: which suits your entrance

The right type depends on the space available. Both can be made to measure, so the choice is practical rather than limited by size.

• Sliding gates need free space along the wall to open, but no room in front. They suit long driveways and sloped entrances.
• Swing gates need clear space in front or behind the opening, but are simple and suit a narrower entrance.

We will look at your site and recommend the option that fits the space and the way you use the entrance.

How the custom process works

The process is straightforward and follows the same steps for every project:

• Send an inquiry with photos of the entrance.
• We visit the site and take exact measurements.
• You receive a drawing and written specification for approval.
• After approval, the gate is produced in our factory.
• It is finished with hot-dip galvanizing and powder coating, then installed.

Approving the drawing before production helps avoid surprises on site.

What to check on your opening

Before contacting us, it helps to note a few details. Measure the clear width between the posts and the height you need. Check whether the ground is level or sloped, and whether there is space for the track or the swing arc. Note where the power supply and any remote access points are located.

These details shape the design, and we will confirm them during the site visit.

Safety and standards

An electric gate must be safe for people and vehicles, with reliable operation and proper safety features. Safety requirements for gates and railings in Israel are governed by the relevant standards, including SI 1142 for railings. Exact technical values depend on your specific project, so we check these with the engineer as part of the design rather than relying on general figures.

A custom gate gives us the room to plan these requirements into the design from the start.

Finish and appearance

A custom gate should look like it belongs to the property. Because we manufacture to measure, the proportions, the infill pattern and the finish can all be matched to your building, fence and other ironwork. Hot-dip galvanizing protects the steel, and powder coating gives a durable colored finish in the shade you choose.

Frequently asked questions

Do you make electric gates in any size?

We manufacture to measure, so the gate is designed for your specific opening. Exact feasibility depends on the site, which we confirm during the on-site measurement.

Do I need to send measurements first?

Photos and a rough description help us start, but we take the final measurements on site so the gate fits exactly. Send photos of the entrance with your inquiry.

Can a custom gate match my existing railings or fence?

Yes. Since we produce to measure in our factory, the design, proportions and finish can be coordinated with your existing ironwork.

Will I approve the design before production?

Yes. You receive a drawing and written specification, and production begins only after you approve them.

Common mistakes to avoid

The most common mistake is ordering before measuring the actual opening, which leads to a gate that does not fit the posts or the swing and sliding space. Another is choosing a type without checking whether there is room for it.

Our recommendation

Measure the clear opening, note the slope and available space, and choose sliding or swing based on the room you have. Let the on-site measurement and approved drawing confirm the final design before production.

Summary

A custom-sized electric gate is possible for almost any entrance, as long as the design is based on accurate measurements and an approved drawing. Techno Kol Uzi designs and builds each gate to fit your opening.

Related guides

• How do I request a quote for an electric sliding gate?
• How do I choose a gate design that suits my fence?
• What information should I prepare before ordering a gate?
• Can glass panels be used in a sliding or swing gate?
• How long does installation of an electric gate usually take?
• Does aluminum work well for an electric gate?
• All models in this category