Checking Property Lines and Boundaries Before Fencing

t306-19

Before any fence goes up, confirm where your property line actually runs using your title documents, a survey, or the land registry records, and do not rely on neighbors' fences or memory. Once the line is confirmed, mark it on site, plan the fence position with a measured drawing, and agree the details with neighbors in writing where needed.

Why the property line matters before you build

A fence is a permanent structure, and once it is set in concrete it is difficult and costly to move. Many boundary disputes start with a fence placed a few centimeters over the line, sometimes by a previous owner. Checking the line first protects your investment and your relationship with neighbors.

Remember that an existing fence, hedge or wall does not always mark the true boundary. Old structures can be offset from the registered line, so treat them as clues rather than proof.

Find the true boundary

Start with your property documents. The title deed and the registered plan show the dimensions and corner points of your plot. If anything is unclear, a licensed land surveyor can locate the boundary corners on the ground and mark them for you.

Check the registered plan and the coordinates of the corners.
Ask a licensed surveyor to mark the boundary points on site.
Keep a copy of the survey with your project file.

Plan the fence position with a measured drawing

Once the corners are marked, measure the exact run of the fence, including any gates, pillars and the clearance needed for opening a gate or a parking gate. Note slopes and level changes, because the fence will follow the ground. Our team takes these measurements on site, then prepares a drawing and written specification for your approval.

Show the drawing to the building committee or neighbors if the fence sits on a shared line. A signed approval is much easier to resolve now than after installation.

Agree details with neighbors and authorities

For shared boundaries, talk with the neighbor before production starts. Discuss height, design, which side the posts face, and who maintains the fence. Written agreement avoids most future disagreements.

Check whether your plans need a permit or approval from the local planning authority or your building committee, especially for higher fences or changes to a common area. Requirements vary, so confirm with the relevant office before ordering.

Production, finishing and installation

After you approve the drawing, the iron or aluminum sections are manufactured to measure in our Tel Aviv workshop. Steel parts are typically hot-dip galvanized and powder coated for protection against weather, and aluminum is finished to suit the design. Components are checked against the drawing before they leave the factory.

On installation day, the crew sets the posts at the marked points, checks level and alignment, and fixes the panels. Finally, we check the finished line against the survey markers so the fence sits exactly where you agreed.

Tips for a trouble-free fence

Leave a small margin inside your line where possible, especially for posts and foundations, so the fence does not touch the boundary. Keep a record of the survey, drawing, approvals and photos of the installed fence. These documents are valuable if a question comes up years later.

Set the fence slightly inside the line when in doubt.
Store all approvals and drawings together.
Take photos before and after installation.

Frequently asked questions

Can I rely on my neighbor's existing fence to find the boundary?

Not safely. Older fences and hedges are often placed inaccurately, so they may not follow the registered line. Confirm the boundary with your documents or a licensed surveyor.

Who pays for a boundary survey?

This is usually the homeowner ordering the work, though arrangements with neighbors can differ. Ask a licensed surveyor for their terms before you commission the job.

Do I need my neighbor's approval to build a fence on my own land?

If the fence is fully within your own property and meets local rules, you usually do not need approval. For shared lines or common areas, written agreement with neighbors or the building committee is strongly advised.

Can the fence be moved later if I placed it wrong?

Moving a fence is possible but costly, since foundations and sections must be removed and reset. Confirming the line before production is the best way to avoid this.

Common mistakes to avoid

Trusting an old fence or verbal understanding as proof of the boundary, and starting production before the position is marked and approved. Both are common causes of costly disputes.

Our recommendation

Confirm the line with documents or a licensed surveyor, mark it on site, and get the drawing approved in writing before production starts. Leaving a small margin inside the line is a simple safeguard.

Summary

Check your property line first, plan the fence position with a measured drawing, and get agreements in writing so the installed fence stays where it belongs.

השאירו פרטים ונחזור אליכם