Confirm Your Balcony Railing Order Specifications

t320-39

To confirm a balcony railing order, check the final drawing and written specification against your on-site measurements, including length, height, infill pattern, material, finish and fixing method. Once you approve these details in writing, the factory moves to production, so take time to verify each point first.

Why Confirming Specifications Matters

Once a balcony railing enters production, changes become costly and slow. Metal is cut, welded and finished to the exact dimensions agreed, so any error found late can mean remaking whole sections. Confirming the specification at this stage protects your budget and your schedule.

Treat the approval step as a final check, not a formality. Read the drawing carefully, compare it with the measurements you gave, and ask questions about anything that is unclear before you sign off.

Check the Measurements and Layout

Start with the basics: the total length of each railing run, the position of corners and gaps, and the location of any posts or fixing points. Confirm that the drawing matches the actual balcony, not an older plan or a rough sketch.

Overall length of each section
Corner and return positions
Gaps at the wall or slab edges
Fixing point locations

Our team measures on site before drawing, but it is still worth checking these numbers yourself.

Confirm Height, Infill and Design

Review the railing height and the infill pattern shown in the drawing. Height is an important safety point, and exact requirements are checked with the engineer against the applicable standard, including the Israeli railing standard SI 1142. Make sure the infill spacing and pattern match what you chose, whether vertical bars, horizontal lines or a decorative design.

Points to verify

Final height from the floor or slab
Bar spacing and pattern
Top rail profile and style

Confirm Material, Finish and Fixing Method

Confirm the material and the surface finish you selected, since they affect both appearance and durability. Finishes such as hot-dip galvanizing and powder coating should be listed clearly with the colour reference.

Check how the railing will be fixed: into the slab, onto the balcony edge or through a base plate. The fixing method depends on the structure, so confirm it with the installer before production begins.

Review the Drawing and Written Specification

You will receive a drawing and a written specification. Compare both documents line by line. The drawing shows geometry, while the written specification lists materials, finish, quantities and installation notes. The two should agree completely.

If anything differs, ask for a corrected version. Do not approve a document that you have not fully understood.

Approve, Produce and Install

After you approve the specification in writing, production begins in our factory. Components are cut, assembled, finished and then transported for installation. Keep your written approval on file, as it becomes the reference for the job.

Installation follows the confirmed plan. If site conditions differ from what was measured, the installer will tell you before fixing anything, so any adjustment can be agreed in advance.

Frequently asked questions

Can I change the design after I confirm the order?

Changes after approval are possible but may cause delays and additional work, since production may already have started. It is best to request any changes before you sign the specification.

Who checks the railing height and safety details?

The height and safety details are checked with the engineer against the applicable standard, including SI 1142. Exact values depend on your building and are confirmed at the planning stage.

Do I need to be present for the on-site measurement?

It is helpful to be present or to point out the balcony clearly, so the team can confirm the layout and any obstacles. Clear photos also help during the inquiry stage.

What should I send to start the process?

Send photos of the balcony, a rough sketch with dimensions if you have one, and a description of the design you prefer. This helps us prepare an accurate drawing for your review.

Common mistakes to avoid

Approving a drawing without comparing it to the real balcony measurements is the most common error. Overlooking the fixing method or finish details can also lead to unexpected results after installation.

Our recommendation

Before signing, walk the balcony with the drawing in hand and check every dimension against the actual space. Ask for a written answer to any point you do not fully understand.

Summary

Confirming your balcony railing specification carefully protects you from costly changes later. Check measurements, height, infill, finish and fixing method, then approve in writing before production starts.

השאירו פרטים ונחזור אליכם