Custom Sliding Gates for Narrow Driveways | Techno Kol Uzi

t279-13

A custom sliding gate is the practical choice for a narrow driveway because it travels sideways along the fence line instead of swinging into the drive or onto the street. It is designed to your exact opening, ground conditions and automation needs, so the gate fits your space rather than forcing the space to fit a standard gate.

Why a sliding gate suits narrow driveways

A swinging gate needs clear room on the inside or outside to open fully, and on a narrow plot that space is often simply not there. A sliding gate moves parallel to the fence, so it uses only the width of the opening plus a short track length on one side. That makes it ideal for tight entrances, shared walls and driveways where a car must pull in close to the gate.

Sliding gates also stay clear of the street, which matters on busy roads and in shared courtyards where a swinging leaf could block a neighbor or a passing pedestrian.

How a custom sliding gate is designed

Every narrow driveway is different, so the design starts with a site visit. We check the opening width, the slope of the ground, the position of walls and posts, and the space available for the track on one side. The gate leaf is then built to match your style, whether that is a solid iron panel for privacy, an open design for visibility, or a mixed frame with infill.

Once the layout is agreed, you receive a drawing and written specification before anything goes into production.

Materials and finishing options

Sliding gates are made from iron, aluminum or stainless steel depending on the look you want, the weight of the leaf and the exposure to weather. Iron gives a strong, traditional character, while aluminum is lighter and well suited to modern designs. Stainless steel works well where a clean, low-maintenance finish is important.

Hot-dip galvanizing for long-term protection against corrosion
Powder coating in the colour you choose
Infill options such as flat bars, mesh or solid panels

Automation and safety

Many owners add an electric motor so the gate opens with a remote, which is especially useful when you need to wait for the gate in a narrow space. The motor, rail and safety sensors should be matched to the weight and length of the leaf. Safety features such as obstacle detection and proper guiding of the leaf are important, particularly where children or pets are present.

Railings and any pedestrian gates beside the driveway should be checked against the Israeli railing standard SI 1142 in general terms, and exact dimensions are confirmed with your engineer.

Ground preparation and installation

A sliding gate depends on a level, stable track. Before installation the ground along the fence line needs to be prepared so the rail sits straight and does not sink or shift. Proper foundations for the posts and the track keep the gate running smoothly for years.

Installation is carried out after the gate is produced in our factory at 37 Rival Street, Tel Aviv, so that the fit is checked against your real opening.

Our process from inquiry to installation

The process is simple and transparent. You send an inquiry with photos of the entrance, we arrange an on-site measurement, and we prepare a drawing and written specification. After you approve it, the gate is manufactured in the factory, finished with galvanizing or powder coating, and then installed at your home or yard.

Inquiry with photos
On-site measurement
Drawing and specification for approval
Factory production and finishing
Installation

Frequently asked questions

How much space does a sliding gate need?

A sliding gate needs the width of the opening plus room for the track to travel along one side, usually a short stretch of fence line. The exact space is confirmed during the on-site measurement.

Can a sliding gate be automated?

Yes, an electric motor can be added to a sliding gate, with remote control and safety sensors matched to the size and weight of the leaf. We will recommend the setup that suits your entrance.

Is a sliding gate suitable for a sloping driveway?

Sliding gates can be installed on slopes, but the track and foundations must be prepared carefully so the gate stays level and runs smoothly. The ground is assessed during the site visit.

What materials can a custom sliding gate be made from?

Custom sliding gates are made from iron, aluminum or stainless steel, with galvanizing or powder coating for protection and colour. The best choice depends on the look, weight and weather exposure.

Common mistakes to avoid

Choosing a gate before measuring the real opening and track space often leads to a leaf that does not fit or cannot travel freely. Skipping proper ground preparation can also cause the track to sink or the gate to bind over time.

Our recommendation

Measure the full opening and the clear length beside it before choosing a design, and ask for a written drawing before production starts. For automated gates, match the motor and safety sensors to the actual weight of the leaf rather than a generic kit.

Summary

A custom sliding gate is the smart solution for narrow driveways, saving space while fitting your exact entrance. Careful measuring, the right materials and proper installation keep it working reliably.

השאירו פרטים ונחזור אליכם