Gate Intercom and Video Entry Options for Electric Gates

t287-21

A gate intercom video entry system lets you see and speak with visitors before you open an electric gate. Choose it when you want to verify who is at the gate, especially at homes with frequent deliveries or shared driveways. Plan the camera position and power supply during the design stage so the gate, the motor and the entry unit work together.

Why add video entry to an electric gate

An electric gate protects your property, but an unknown car or person at the entrance is a risk if you open blindly. Video entry lets you check who is outside, speak to them and decide whether to open, all from inside the house or from your phone.

It is especially useful for families with children, homes that receive frequent deliveries, and properties where service workers visit regularly. Many owners also value the record of visits that a camera provides.

Intercom only versus video entry

A basic intercom gives you two-way audio. It is simpler and less costly to install, and it works well when you mainly need to confirm a voice before opening.

Audio intercom: speech only, simpler wiring
Video entry: camera image plus audio, better for identifying visitors
Smart video entry: app access and visitor history, depends on your network

Video is the better choice if you want to recognize visitors visually, not just hear them.

Choosing the right position for the camera and unit

Place the entry panel where a visitor can reach it comfortably from a parked vehicle as well as on foot. The camera should capture faces and number plates clearly, without glare from the sun or from street lights.

Avoid positions where passing traffic or a neighbor's entrance will appear in the frame, and think about the height so that both adults and children are visible. We check these points on site before finalizing the drawing.

Wiring, power and compatibility with the gate motor

The entry unit needs a reliable power supply and cabling run from the house to the gate. Confirm early whether the motor already has input terminals for an intercom or whether an additional module is needed.

Consider the distance between the entry panel and the indoor unit, and whether the cable route can be protected from weather and digging. Good planning here prevents costly rework once the gate is installed.

Security and privacy considerations

A video entry system is only useful if it stays secure. Choose a unit with a sturdy, weather-resistant housing and make sure the access codes or cards cannot be easily copied. Limit who has the app or indoor access.

Also keep in mind that cameras recording public areas should be positioned responsibly and respect neighbors' privacy. Aim the lens at your entrance rather than at the street or adjoining property.

Planning the project with the gate

The best results come when the gate, the motor and the video entry are designed together. Share your preferred layout with us, including the position of the house, the driveway slope and where you want the indoor unit.

Our process runs from an inquiry with photos, through an on-site measurement and a written specification, to your approval before production. This lets you review the entry arrangement before anything is built or installed.

Frequently asked questions

Can I see visitors on my phone?

Some video entry systems offer app access, which lets you view the camera and open the gate remotely. Availability depends on the system you choose and your internet connection, so confirm this before buying.

Do I need video or is an intercom enough?

An intercom is enough if you only need to confirm who is calling. Video is better if you want to recognize visitors visually, such as delivery staff or unfamiliar vehicles.

Can video entry be added to an existing electric gate?

In many cases yes, but the motor must have a compatible input and the cable route must be possible. An on-site check will confirm whether an upgrade is practical for your gate.

Will the system work during a power cut?

This depends on the gate motor and any backup power you install. Ask us during planning so the power arrangement for the gate and the entry unit is designed together.

Common mistakes to avoid

Placing the camera where glare or street lights ruin the image, and forgetting to plan cabling before the gate is installed. Both are far easier to avoid at the design stage than to fix later.

Our recommendation

Plan the entry panel, camera height and cable route at the same time as the gate design, and test the view from a parked car and from a person on foot before final approval.

Summary

Video entry lets you see and speak with visitors before opening an electric gate. Good results depend on camera position, power, cabling and compatibility with the motor, all planned together from the start.

השאירו פרטים ונחזור אליכם