Metal Mezzanine Storage Structures for Businesses

t493-27

A metal mezzanine storage structure adds a raised floor within an existing space, creating extra storage or working area without moving or expanding the building. It is designed to measure, fabricated in steel from drawings made after an on-site survey, and installed with attention to load, access and safety.

What a Metal Mezzanine Does for Your Business

A mezzanine uses height that is already available. In a warehouse, workshop or showroom with generous ceiling height, a raised steel platform can double the usable area on the same footprint. This is often far more practical than relocating or building an extension.

Typical uses include shelving for stock, archive storage, packing areas, offices above the shop floor, and display levels for retail. The right design depends on what will be stored or done on the platform and how heavy it will be.

Planning the Structure: Survey and Drawings

Every mezzanine starts with an on-site measurement of the clear height, column positions, wall conditions and access routes. We record these details and prepare a drawing and written specification for your review before anything is produced.

Clear height from floor to underside of the ceiling or beams
Planned load per square metre and the type of goods
Position of the staircase, doors and walkways
Lighting, sprinklers and ventilation that must stay clear

Materials and Finishing

Mezzanine frames are usually built from structural steel, with decking in steel plate, perforated panels or wood depending on use. Steel elements are hot-dip galvanized for corrosion resistance, or powder coated when a specific colour or appearance is needed for a visible area.

For a clean look in a client-facing space, we can match the finish to the rest of the interior. For storage, a durable galvanized finish is usually the most economical choice over time.

Safety: Railings, Stairs and Access

Any raised platform needs guarding at its open edges and a safe way up and down. Railings are designed in line with the Israeli railing standard SI 1142, and the exact heights, spacing and loads are confirmed with your engineer during design rather than assumed.

Stairs should be sized for the traffic they will carry, with handrails on the sides that are used. Where goods are moved up by hand or trolley, a wider stair or a dedicated lift point may be worth considering.

Working with Architects, Designers and Contractors

We regularly work alongside architects, interior designers and contractors. Clear drawings, load information and coordination on connection points make installation smoother for everyone involved.

If you are the designer, send us your plans and we will check fabrication details against the site survey. If you are the business owner, we can help translate your storage needs into a structure the designer can approve.

From Inquiry to Installation

The process is simple to follow. You send photos and basic dimensions, we arrange an on-site measurement, and we prepare a drawing and written specification. Once you approve, the structure is produced in our factory at 37 Rival Street, Tel Aviv, finished, and installed on site.

Keeping the schedule clear, especially around stock movement and operating hours, helps the installation go quickly and with minimal disruption to your business.

Frequently asked questions

How much weight can a metal mezzanine hold?

The load capacity is set during design based on your planned storage and the existing building structure. We confirm the figures with your engineer before fabrication rather than estimating them.

Does a mezzanine require a building permit?

Requirements depend on the building and local regulations, so it is best to confirm with your architect or the relevant authority before starting. We can provide the drawings and specification needed for that process.

Can a mezzanine be dismantled and moved later?

Many mezzanines are designed with bolted connections, which allows them to be taken apart and reinstalled if your needs change. This should be planned from the start.

Do you install the mezzanine yourselves?

Yes, we handle fabrication in our Tel Aviv factory and installation on site, coordinating the work so it fits your operations.

Common mistakes to avoid

Choosing a mezzanine size or load before measuring the space, or leaving out the staircase and access route in the plan, often leads to costly changes later. Always start with a proper site survey and a written specification.

Our recommendation

Plan the staircase and guarding early, since they affect how usable the platform really is. Share your actual storage weights and daily traffic with your designer so the structure is built for real use.

Summary

A custom metal mezzanine storage structure is one of the most effective ways to add floor space without expanding the building. Careful measurement, clear drawings and safe access make the difference.

השאירו פרטים ונחזור אליכם