Old Iron Door Removal and Replacement Service in Tel Aviv

t419-26

Yes, a proper replacement service removes the old iron door, takes it away, and fits the new one in the same visit. At Techno Kol Uzi, we measure the opening first, so the removal and installation are planned together and the frame is ready for the new door.

What the Removal Process Involves

Removing an old iron door is more than unscrewing hinges. The door is typically fixed to the frame with anchors set into the wall, and the frame itself may need to be cut back or cleaned before a new unit can sit properly. We detach the leaf carefully, protect the surrounding tiles or plaster where possible, and remove the frame when it is damaged or no longer matches the new opening.

Every removal starts with a site visit so we know exactly what is in the wall before any work begins.

Why Measuring On Site Matters

An old opening is rarely perfectly square. Years of settling, previous repairs and uneven floors mean the real dimensions can differ from what is written on paper. We measure the width, height and depth at several points, check the threshold level and note the swing direction.

Opening width and height at top, middle and bottom
Wall thickness and frame depth
Floor condition and threshold height
Swing direction and handing of the new door

Handling the Old Door Disposal

Once the old door is out, we take it away so it does not sit in your entrance during the work. Iron doors are heavy and awkward, so this is done with care for the people and the building. We clear the landing and leave the work area clean at the end of each stage.

If you would like to keep any parts, such as a handle or lock, let us know before the removal day and we will set them aside.

Preparing the Opening for the New Door

After the old door is removed, the opening is prepared for the new unit. This can include removing old anchor residue, repairing small chips, and checking that the frame is plumb. If the existing frame is in poor condition we will say so in the written specification, so you can decide how to proceed before installation.

A clean, true opening makes a noticeable difference to how smoothly the new door closes and seals.

From Specification to Installation

Our process is straightforward. You send an inquiry with photos, we measure on site, and we prepare a drawing and written specification for your approval. The new door is produced in our Tel Aviv factory at 37 Rival Street, finished, and then installed. The removal and installation are scheduled so your entrance is out of use for the shortest possible time.

Nothing goes into production until you have approved the specification in writing.

Planning Your Replacement Day

A little planning keeps the day running smoothly. Let the building committee or neighbors know the date, clear the path to the door, and move any items that could be damaged by dust or vibration. If you need the entrance back in use the same day, mention this when you request a quote so we can plan accordingly.

Frequently asked questions

Do you take away the old iron door as part of the replacement?

Yes, removal and disposal of the old door is handled as part of the replacement service. We take the old unit away so it does not stay in your entrance.

Do you need to measure before removing the old door?

Yes, we measure the opening on site before any work begins. This confirms the dimensions, swing direction and frame condition for the new door.

Can I keep the handle or lock from the old door?

You can, as long as you let us know before the removal day. We will set aside any parts you want to keep.

What happens if the old frame is damaged?

We check the frame during the site visit and note any damage in the written specification. You can then decide how to repair or replace it before installation.

Common mistakes to avoid

Many people book the new door without checking the opening, leading to fitting problems later. Always have the old door and frame assessed before the replacement day.

Our recommendation

Ask for an on-site measurement and a written specification before approving the work. Confirm in advance whether the old frame will be reused or replaced, since this affects the timing and final result.

Summary

A complete replacement service removes, disposes of and replaces your old iron door in one coordinated process, starting with an accurate on-site measurement.

השאירו פרטים ונחזור אליכם