Order Aluminum Window Frames With Integrated Blinds Cavity

t400-48

To order aluminum window frames with an integrated blinds cavity, you specify the frame profile, the cavity depth and the blind type before any measurements are taken. Our team measures on site, produces to your exact dimensions in our Tel Aviv factory, and confirms every detail with a written specification you approve before work starts.

What an integrated blinds cavity is

An integrated blinds cavity is a built-in housing at the top of the window frame where the roller or venetian blind retracts when not in use. Because the blind sits inside the frame, nothing hangs on the glass or protrudes into the room, and the shading stays protected from dust and wind.

This suits buyers who want clean lines, fewer exposed parts and shading that works as part of the window rather than an add-on.

What to decide before you order

Before contacting us, it helps to settle a few points so the quote and drawing are accurate:

The number and size of window openings that need the cavity
Whether the blind is roller, venetian or another type, and whether it is motorized
Which side the operating mechanism should be on
The colour and finish you prefer for the aluminum
Whether the window opens outward, inward or slides

Having photos of each opening ready speeds up the first review.

How measuring works for cavity frames

A cavity frame depends on precise measurements because the housing, the blind and the opening must fit together. Our team visits the site and measures each opening, checking for level, plumb and any irregularities in the wall or lintel.

The measurements also capture the space above the opening so the cavity depth and height are correct. Please keep the area clear and let us know about any existing blinds or shutters that will be removed.

From drawing to approval

After measuring, we prepare a drawing and a written specification covering dimensions, profile type, cavity layout, blind type, hardware and finish. This is the document you review.

Nothing goes into production until you have approved the drawing and specification in writing. If you want a change, it is far easier to make it at this stage than after manufacturing starts.

Production and finishing in our factory

Every frame is manufactured in our factory at 37 Rival Street, Tel Aviv, to the approved drawing. Aluminum profiles are cut, assembled and fitted with the cavity housing, then finished in the colour you selected.

Checking the fit of the blind housing during production helps prevent problems on installation day, when adjustments are harder to make.

Installation and what to check on delivery

On installation day, the frame is fixed into the opening, levelled and sealed, and the blind mechanism is tested. Take a few minutes to check that the blind runs smoothly, stops where expected and that the cavity cover sits neatly.

If anything does not match the approved specification, tell us straight away so we can review it on site.

Frequently asked questions

Can I add an integrated blinds cavity to existing windows?

Usually the cavity is part of a new frame, so existing windows are normally replaced rather than modified. Send photos of your current openings and we will advise on what is practical for your case.

Is the blind motorized or manual?

Both options are possible, and you choose the operating method when you place the order. Let us know your preference so the mechanism and cavity are designed for it.

Do I need to be home for the measurement visit?

It is best to be present or have someone who can confirm the openings and any existing features. This helps us capture your wishes accurately.

Can I change the design after approving the drawing?

Changes are possible before production starts, and we will review how they affect the specification. Once manufacturing begins, changes are more limited, so review the drawing carefully.

Common mistakes to avoid

Ordering before measuring the openings properly, or failing to confirm the blind type and operating side, often leads to cavity sizes that do not suit the blind. Approve the written specification only after checking every dimension.

Our recommendation

Send clear photos of each opening and note which side you want the blind operated from before the site visit. Doing this upfront makes the drawing faster and reduces revisions.

Summary

An integrated blinds cavity gives you clean-looking built-in shading, and the result depends on careful measuring, a clear specification and written approval before production.

השאירו פרטים ונחזור אליכם