Request Samples of Aluminum Window Profiles and Finishes

t400-40

You can request physical samples of aluminum window profiles and finishes from Techno Kol Uzi before making a decision. Send us your project details and the finishes you are considering, and we will prepare the samples so you can compare color, texture and profile shape in real light.

Why Samples Matter for Aluminum Windows

Photos on a screen rarely show how a finish really looks. Color can shift under daylight, and a matte or textured powder coat can read very differently from one lighting condition to another. Holding a real profile section lets you check its thickness, the feel of the surface and how the corners are finished.

Samples also help you compare profile shapes side by side. A slimmer frame can change the look of a facade, and seeing the actual cross-section helps you judge whether it suits the building style and the glazing you have in mind.

What You Can Ask to See

When you request samples, it helps to be specific about what you want to compare. Common requests include:

Profile cross-sections in the shapes you are considering
Powder coat finishes in the colors and textures on your shortlist
Matte, satin and gloss versions of the same color
Corner and joint details where the frame meets

Tell us which options matter most, so the samples focus on what you need to decide.

How to Send Your Request

Start by sending us a short message with your project address area, the type of windows, and any color references you already have. Photos of the building, a color code or a picture from a catalogue all help us understand your direction quickly.

If you are working with an architect or interior designer, include their contact details so we can coordinate directly. Clear information at this stage saves time and makes the samples more useful to you.

Our Process from Request to Decision

After receiving your request, we review the details and confirm which samples to prepare. Once you have the samples, you can take your time comparing them with the building, the surroundings and the lighting at different times of day.

When you choose a profile and finish, we move on to on-site measurement and a written specification for your approval. Production happens in our factory on Rival Street in Tel Aviv, followed by finishing such as powder coating, and then installation.

Tips for Comparing Samples Properly

Look at each sample in the place where the windows will be installed, if possible, or near a window with natural daylight. Check a few times of day, since warm and cool light change how colors appear.

Compare finishes against neighboring materials on the facade
Look at the sample from a standing distance, not only up close
Note how the surface feels and whether it shows fingerprints easily

Preparing for Your Final Choice

Once you have narrowed the options, write down the profile, finish code and any notes about texture or sheen. This record makes the approval step clear for everyone involved, including the contractor and the building committee.

Exact technical values such as profile strength and glazing requirements are checked with the engineer for your project, so the samples are a starting point for a decision that is confirmed later in the written specification.

Frequently asked questions

Can I request samples for only one finish?

Yes, you can request samples for a single finish or several at once. Tell us which colors and textures you are considering, and we will prepare the ones that matter for your decision.

Do I need to visit the factory to see the samples?

You can ask us about the arrangement for your request. Our factory is at 37 Rival Street in Tel Aviv, and we will confirm how to get the samples to you.

Should I bring photos of the building?

Photos are very helpful. They let us understand the style and surroundings, so the samples you receive match the look you are aiming for.

Are samples the same as the final product?

Samples show the profile shape and finish closely, but the final windows are made to your measurements and confirmed in the written specification after you approve.

Common mistakes to avoid

Choosing a finish only from a screen photo, or comparing samples indoors under one light, often leads to a color that looks different on the building. Check samples in daylight and near the actual facade.

Our recommendation

Request samples early, before measurements are finalized, and compare at least two sheens of your preferred color. Note the finish code and profile details in writing so the approved choice carries through to production.

Summary

Requesting aluminum window profile and finish samples lets you judge color, texture and shape before committing. Send us your project details and the options you are considering, and we will prepare samples from our Tel Aviv factory.

השאירו פרטים ונחזור אליכם