Order Stainless Steel Glass Door Made to Measure

Choosing the stainless steel grade and frame

Stainless steel is available in several grades, and the right one depends on where the door stands. For a sheltered entrance inside a building, a standard grade performs well. For a door close to the sea air or exposed to rain and salt, a more corrosion-resistant grade is the safer choice.

The frame carries the weight of the glass and the hardware, so its profile and wall thickness matter as much as the outer finish. Tell us whether the door opens inward or outward and how heavily it will be used, and we will recommend a frame suited to that daily use.

Selecting the glass panels

The glass can be a single panel, a row of panels or a decorative pattern set into the steel. Safety glass is a common choice for entrance doors because it breaks into small pieces rather than sharp shards.

• Clear glass for maximum light
• Frosted or patterned glass for privacy
• Tinted glass for sun control

Glass size and position affect both the look and the structural strength of the door, so we confirm the layout together before production.

Finishes that protect the door

The finish determines how the door looks and how it handles weather. Brushed stainless steel hides fingerprints and suits modern interiors. Polished finishes give a brighter, more reflective look for showpiece entrances.

For steel parts that are not stainless, we use hot-dip galvanizing and powder coating to add protection. Discuss the colour and surface you want, and we will confirm what is practical for the location.

How measurement and specification work

Before anything is built, we visit the site and measure the opening. Floors that are not level, walls that are out of square and existing frames all change the final size, so measuring on site avoids costly corrections later.

After measuring, we prepare a drawing and a written specification listing the grade, profile, glass, finish and hardware. You review and approve it before production begins.

From approval to installation

Once you approve the specification, the door is cut, welded, glazed and finished in our factory on Rival Street in Tel Aviv. Working in the workshop lets us check each stage carefully before the door leaves.

Installation follows, with the door fitted, aligned and tested for smooth opening and closing. Ask us about any hardware you want included so it is specified from the start.

What to prepare before you order

A few details help us quote and plan quickly. Gather clear photos of the opening from inside and outside, a rough measurement of width and height, and notes on the side the door opens to.

• Photos of the existing opening
• Approximate width and height
• Preferred glass type and finish
• Any locks or handles you want

Sending these with your first message lets us respond faster and plan the visit.

Frequently asked questions

Can I choose the glass type for my stainless steel door?

Yes. You can select clear, frosted, patterned or tinted glass depending on whether you want light, privacy or sun control. We confirm the best option for your door during the specification stage.

Do you measure the opening on site?

Yes, we visit the site to measure the opening before production. This accounts for uneven floors and out-of-square walls so the door fits correctly.

Which stainless steel grade should I choose?

The grade depends on the location, with more corrosion-resistant options suited to exposed or coastal areas. Tell us where the door will stand and we will recommend the right grade.

Can I approve the design before production starts?

Yes. We prepare a drawing and written specification, and production begins only after you approve it.

Common mistakes to avoid

Ordering from a rough measurement taken without checking the opening, or choosing a grade without considering weather exposure, are the most common causes of problems. Both can be avoided by measuring on site and confirming the specification before production.

Our recommendation

Decide on the glass layout and the stainless grade before anything else, since these shape the frame and the cost of changes later. Send clear photos and approximate dimensions in your first message so the visit is planned well.

Summary

A made-to-measure stainless steel glass door is planned around the opening, the grade, the glass and the finish, all confirmed in a written specification before production in our Tel Aviv factory.

Related guides

• Compare Iron vs Aluminum Doors: Which to Choose
• Buy Powder Coated Aluminum Doors Made to Measure
• Choosing an Iron Front Door for a Ground-Floor Apartment in Israel
• Request a Galvanized Steel Door Quote
• Aluminum Balcony Doors for Small Israeli Apartments with Limited Space
• Order Custom Iron Doors for Your Entrance
• All models in this category