Pedestrian Gate Beside Your Driveway Gate: Planning Guide

t283-18

A pedestrian gate beside a driveway gate gives you separate, everyday walk-through access without opening the vehicle gate. It works best when the pedestrian opening is planned together with the electric sliding or swing gate, so both share posts, alignment and access control.

Why Add a Separate Pedestrian Gate

Opening the full parking gate for a short walk wastes energy, exposes the car to the street and makes the entrance less secure. A dedicated walk-through gate lets residents, visitors and delivery staff enter on foot while the vehicle gate stays closed.

Many homeowners also want a pedestrian route that is clear of the driveway, especially when children, elderly family members or pets use the path daily.

Layout and Spacing Beside the Vehicle Gate

The pedestrian opening is usually placed on the side of the driveway gate, either on the same fence line or on a return wall. Planning the spacing early prevents conflicts with the sliding track, the swing arc of a leaf or the position of the post.

Check the swing or sliding path of the vehicle gate before fixing the pedestrian post.
Keep a comfortable walking width and clear landing space on both sides.
Plan drainage and paving so water does not collect at the threshold.

Choosing Materials and Finish

The pedestrian gate should match the vehicle gate in frame profile, infill and color so the entrance looks like one composed element. Steel and aluminum are both common choices, depending on the look you want and the exposure to weather.

For durability in the Tel Aviv climate, hot-dip galvanizing followed by powder coating is a proven finishing route for steel. Discuss the finish with us so the gate matches the existing fence and facade.

Access Control and Security

A pedestrian gate needs its own locking and access solution. Options include a mechanical lock, an electric strike connected to an intercom, or a keypad or card reader that works independently of the vehicle gate.

Consider a self-closing hinge or closer so the gate returns shut after each use. Make sure emergency egress from the property remains possible while the gate stays secure from the outside.

Installation Sequence and Coordination

The best results come from installing the vehicle gate and the pedestrian gate in one coordinated project. Posts, foundations, electrical conduits and cabling for locks or intercoms can be prepared together, avoiding later digging through finished paving.

Our process starts with an inquiry and photos, followed by on-site measurement, a drawing and written specification, your approval, factory production, finishing and installation.

Safety, Standards and Final Checks

Pedestrian openings must be safe for people walking through them, including fingers and clothing caught by moving parts. Where railings or guards are involved, the Israeli railing standard SI 1142 applies in general terms, and exact dimensions should be confirmed with your engineer.

Before handover, test the opening and closing action, the lock, the self-closer and the alignment with the adjacent vehicle gate.

Frequently asked questions

Can a pedestrian gate be added to an existing driveway gate?

In many cases yes, if there is space beside the driveway gate and the posts and foundation can be adapted. A site visit is needed to confirm the structure and the access route.

Should the pedestrian gate match the vehicle gate?

Matching the frame profile, infill and color usually gives the cleanest result. It makes the entrance look designed as one unit rather than two separate additions.

How do I keep the pedestrian gate secure?

Use a lock or electric strike with a self-closer, and connect it to an intercom or access control if you need remote opening. Keep the locking method independent of the vehicle gate.

Do I need the pedestrian gate planned at the same time as the parking gate?

It is strongly recommended. Planning both together avoids conflicts in the swing or sliding path, shares foundations and allows cable routes to be prepared once.

Common mistakes to avoid

Placing the pedestrian gate without checking the vehicle gate's swing or sliding path, and forgetting to plan cabling for locks or intercoms before the paving is finished.

Our recommendation

Plan the pedestrian and vehicle gates as one project from the first measurement, and agree on the access control method before production starts.

Summary

A pedestrian gate beside a driveway gate adds safe, everyday access when it is designed together with the vehicle gate.

השאירו פרטים ונחזור אליכם