Pedestrian Gate Designs That Match Your Main Entrance

Start by reading the main entrance

Before choosing a side gate, look closely at the electric parking gate you already have or plan to install. Note the frame thickness, the spacing of the vertical bars, the shape of any decorative top or scroll, and the exact colour of the finish.

These details are the vocabulary of your entrance. A pedestrian gate that speaks the same vocabulary will read as one design, even when it is much narrower and lighter than the vehicle gate.

Repeat the profile and bar rhythm

The simplest way to tie two gates together is to repeat the profile. If the main gate uses a flat bar frame with square vertical pickets, use the same bar width and picket spacing on the pedestrian gate.

• Keep the same picket spacing so the rhythm lines up.
• Match the frame section so the thickness looks consistent.
• Carry over the top or bottom rail height where possible.

Choose a matching finish and colour

Colour mismatch is the most visible flaw in a coordinated entrance. Ask for both gates to be finished in the same batch of powder coating, or specify the same RAL reference, so the shade is identical in daylight.

Hot-dip galvanizing followed by powder coating gives a durable base for any colour, and the finish should be decided at the start of the project rather than added later.

Pick a style that fits the building

Coordination does not mean copying every line. A contemporary entrance with clean geometry suits a flat pedestrian gate with horizontal or vertical slats. A more traditional facade may call for a scroll motif or a classic panel.

Quick style checks

Stand back from the entrance and ask whether the side gate feels like a sibling of the main gate. If it looks like a different family, adjust the pattern before approving drawings.

Plan the hardware and the opening

Hinges, handles and locks are small items that strongly affect the look. Choose hardware in the same finish as the main gate, and place the handle at a comfortable height for everyday use.

Consider whether the pedestrian gate will swing into the pathway or open outward, since this changes how the frame and stops are detailed. The final opening arrangement should be confirmed on site.

Confirm safety details with the engineer

A railing or infill on a pedestrian gate should meet the requirements of the Israeli railing standard SI 1142 where it applies. Exact dimensions for openings and heights are checked with the engineer for each project rather than assumed.

Ask the engineer to review the drawings together with the main gate design, so both leaves are checked as one entrance.

Frequently asked questions

Should the pedestrian gate be the exact same design as the main gate?

Not necessarily. Repeating the profile, bar spacing and finish is usually enough to create a coordinated look without copying every detail.

How can I make sure the colours match?

Specify the same RAL reference for both gates and ask that they be powder coated in the same batch. This helps avoid visible shade differences.

Can a pedestrian gate match a sliding electric gate?

Yes. Sliding and swing gates can share the same frame profile, infill and finish, so the entrance reads as one unified design.

Who checks the safety requirements for the pedestrian gate?

The engineer checks exact dimensions and requirements for each project, including the Israeli railing standard SI 1142 where relevant.

Common mistakes to avoid

Choosing the side gate separately, after the main gate is already finished, often leads to mismatched bars, colours and hardware. Deciding the design, finish and hardware together from the start avoids most visible conflicts.

Our recommendation

Bring photos of the entrance to the first meeting and agree on the profile, picket spacing and RAL colour before any drawing is approved. Having one reference sheet for the whole entry keeps both gates consistent through production and installation.

Summary

A well-matched pedestrian gate repeats the main entrance's profile, bar rhythm, finish and hardware. Planning these together from the start gives a coordinated, professional entrance.

Related guides

• Lighting Integrated with Gate Design: Aesthetic Options
• Cantilever Sliding Gate Aesthetics Explained
• Address Plate and Intercom Placement on Gate Designs
• Sliding Gate Panel Layouts for Narrow Frontages
• Landscaping Around Electric Gates for Visual Harmony
• Swing Gate Leaf Designs for Double-Wing Entrances
• All models in this category