Powder Coated Gate Order: Choose Your Colour and Finish

t271-42

A powder coated gate order starts with choosing a RAL colour, then we measure on site, produce the gate in our Tel Aviv factory, and apply a galvanized base with powder coating for a durable, colour-matched finish. You approve the drawing and colour before production begins, so the gate arrives looking exactly as you chose.

Choosing Your RAL Colour

Every powder coated gate starts with the colour. We work with the RAL colour system, a standard catalogue that lets you name an exact shade, whether it is a deep anthracite for a modern home or a warm sand tone that blends with stone walls.

If you already have a colour sample, such as a window frame, a roof tile or a fence panel, send us a photo along with your inquiry. Seeing the surroundings helps us suggest a shade that will look right in daylight and over time.

How the Order Process Works

The order follows a clear sequence so nothing is a surprise:

Inquiry with photos of the opening and the location
On-site measurement by our team
Written drawing and specification, including the chosen RAL colour
Your approval before production starts
Manufacturing in our factory, then finishing and installation

Each step ends with a document you can review, so you always know what is being built.

Galvanizing and Powder Coating Explained

A gate that will stand outdoors needs more than paint. For steel gates, we hot-dip galvanize the metal first, which gives it a protective zinc layer against rust. After that, the gate is powder coated: dry powder is electrostatically applied and then baked, forming a hard, even skin in your chosen colour.

The result resists scratches and fading better than ordinary brush paint, and it keeps a uniform look across every bar and joint.

Gate Types Available in Powder Coat

The powder coated finish works on the full range of our gates. Common choices include swing gates for driveways, sliding gates for narrow plots, and pedestrian gates that match the main entrance.

Electric parking gates can also be finished in a matching colour, so the vehicle gate and the pedestrian gate look like one set. Tell us how the gate will be used, and we will recommend the right construction for the job.

Timing and Coordination on Site

Plan the gate order alongside your other works. Once the measurements are final, the gate is built in the factory and then finished, so it is best to confirm the opening size and the wall or post details before the paving or plastering is complete.

If the gate connects to an electric motor or a remote system, let us know early so the wiring points and mounting positions can be agreed upon in the drawing.

Caring for a Powder Coated Gate

Powder coated surfaces are low maintenance. Rinse the gate with water every few months, especially near the sea or in dusty areas, and wash off salt or dirt with a mild soap and a soft cloth.

Avoid abrasive pads and harsh solvents, which can dull the finish. Check the hinges and moving parts once a year and lubricate them as needed.

Frequently asked questions

Can I choose any RAL colour for my gate?

Yes, you can select any RAL colour from the catalogue. Send us the code or a photo, and we will confirm it in your written specification before production.

Why is galvanizing done before powder coating?

Galvanizing adds a zinc layer that protects the steel from rust, even where the coating may get scratched. Powder coating then gives the colour and a hard, durable finish on top.

Will the colour look the same as the sample I show you?

A catalogue RAL colour is consistent, but screens and daylight can change how it looks. We recommend viewing a sample in your own light when possible before approving the order.

Do I need to be home for the installation?

It is helpful to be present so we can confirm the position, the swing direction and any electric connections together. We will agree on the installation time with you in advance.

Common mistakes to avoid

Customers often choose a colour from a small screen without checking it against the building, or they forget to tell us about motors and wiring until installation day. Share the colour reference and all accessory plans at the start.

Our recommendation

Bring a colour sample from your home to the measurement visit and look at it in the morning and evening light. This simple step prevents most colour disappointments and keeps the gate in harmony with the rest of the property.

Summary

A powder coated gate gives you a durable, custom-coloured finish built on galvanized steel, produced to measure at our Tel Aviv factory. Choose your RAL colour, approve the drawing, and we handle the rest.

השאירו פרטים ונחזור אליכם