Request a Custom Iron Gate Quote from Your Own Sketch

t274-13

You can request a custom iron gate quote directly from your own sketch. Send us your drawing with photos and rough dimensions, and our team will confirm the details on site before producing the gate in our Tel Aviv workshop.

What to Include With Your Sketch

A hand-drawn sketch is a great starting point, even if it is not to scale. The more information you attach, the faster we can understand what you have in mind and give you an accurate quote.

The overall opening width and height, measured at the wall
Which side the gate swings or slides toward
Photos of the entrance and the surrounding wall or fence
Preferred design, such as bars, panels, or a decorative pattern
Whether you need a pedestrian gate, a vehicle gate, or both

If anything is unclear, mark it on the drawing and we will clarify it together.

How We Review Your Drawing

Once your sketch arrives, our team reviews the design for structural soundness, practical opening clearance, and how it will fit your existing posts and walls. We will point out anything that may need adjustment before production begins.

This review step helps avoid surprises. A gate that looks good on paper must also open smoothly, carry its own weight, and match the surrounding structure.

On-Site Measurement Visit

Before we finalize the drawing, a technician visits your property to measure the opening exactly. Ground slope, wall thickness, and post positions are checked at this stage, because they strongly affect the final design.

During the visit we can also confirm the hinge side, the lock position, and any clearance needed for a driveway or a gate-opening arc.

Written Specification and Approval

After measuring, you receive a drawing and a written specification describing materials, dimensions, finish, and installation details. Please read it carefully and ask questions before approving.

Confirm the final dimensions and design
Check the finish, such as hot-dip galvanizing or powder coating
Review the installation scope

Production starts only after you approve the drawing in writing.

Production and Finishing in Our Workshop

Your gate is manufactured to measure at our factory, where we have been working in iron and steel since 1945. Cutting, welding, and assembly are done with careful attention to straightness and fit.

Finishing protects the gate against weather. Depending on your choice, the gate can be hot-dip galvanized and then powder coated, which gives long-lasting protection and a clean appearance.

Installation at Your Property

Our installation team brings the finished gate to your site, sets the hinges, aligns the leaves, and checks that the gate opens and closes smoothly. Locks, automation, and any final adjustments are completed before we leave.

Where safety railings or guardrails are part of the work, exact requirements are confirmed with the engineer in line with the applicable Israeli standard.

Frequently asked questions

Do I need a professional drawing to request a quote?

No. A simple hand sketch with measurements and a few photos is enough to start. We will refine the design with you during the on-site visit.

Can you build a gate that matches my own design exactly?

Yes, we manufacture to measure, so we can follow your sketch closely. Our team will point out any structural or practical adjustments needed before production.

Do I have to be present for the measurement visit?

It is best if you or someone who knows the property is present, so questions about the opening, access, and preferences can be answered on the spot.

Will I receive a written specification before production?

Yes. You receive a drawing and written specification for your approval, and production starts only after you confirm it.

Common mistakes to avoid

Sending only a rough sketch without any measurements or photos is a common mistake, as it leads to delays and guesswork. Also avoid approving a design before checking how the gate will open and where the hinges and locks will sit.

Our recommendation

Mark the hinge side, the swing direction, and any slope or obstacles directly on your sketch, and include photos from both sides of the opening. This allows our team to give you a precise and reliable quote from the first review.

Summary

Send your sketch with measurements and photos, confirm the details during our on-site visit, and approve a written specification before we manufacture your custom iron gate in Tel Aviv.

השאירו פרטים ונחזור אליכם